-
Industry coordination BDO reminds PBAT to pay attention to cost control
Time of Update: 2022-09-13
Core technology companies include Jindan Technology and COFCO Technology In addition to PBAT, another industrialized degradable material, PLA, has relatively stable overall production capacity due to its high technical barriers.
-
Chemical sales in South China optimizes polypropylene export process
Time of Update: 2022-09-13
The opening of the whole process of polypropylene bulk export of Beihai Refinery has effectively reduced the company's product inventory, eliminated the crisis of the company's warehouse blocking, ensured the smooth flow of the company's production, and laid a foundation for further developing markets in Southeast Asia, Europe and the United States .
-
Shanghai Petrochemical successfully trial-produced special material for polyethylene matte film for the first time
Time of Update: 2022-09-13
Imported products are favored by downstream enterprises in the industry In 2021, Shanghai Petrochemical will promote the special material for linear low-density heavy packaging film, battery flexible packaging film, medical hollow material, black material YGH041T for large-diameter pipes, and the fourth-generation high-rigid polypropylene foam material E800BHM, etc.
-
Sinopec Zhenhai 1.2 million tons/year ethylene project was successfully delivered
Time of Update: 2022-09-13
2 million ton/year ethylene project of “Project No. 1” in Zhenhai Base, a key Sinopec project with an investment of 10 billion yuan, was completed and delivered in 2021, marking the start of the project’s transition from construction to production and operation .
-
Market Status and Development Trend Analysis of China's Waste Plastic Recycling Industry in 2021 Circular Economy Policies Promote the Accelerated Development of Plastic Recycling
Time of Update: 2022-09-13
With technological innovation, product and industrial structure adjustment, China's waste plastic recycling products are developing towards high-quality, multi-variety, and high-tech The recycling and reuse of waste plastics is a complex process.
-
Hainan's first heavy packaging film project officially started
Time of Update: 2022-09-13
, Ltd. started construction in Yangpu Economic Development Zone a few days ago The FFS membrane project with an annual output of 14,000 tons invested by Hainan Zhongyang New Material Technology Co.
-
Henan will build the largest biodegradable plastic base in the province
Time of Update: 2022-09-13
Build a biodegradable plastics industry base in Henan Province According to the agreement, the three parties plan to invest 10 billion yuan to build 400,000 tons/year 1,4-butanediol (BDO), 600,000 tons/year polyadipate/butylene terephthalate (PBAT) and supporting projects.
-
The single test of the secondary compressor machinery of the EVA unit of Zhongke Refinery succeeded
Time of Update: 2022-09-13
At the same time, the operators strictly followed and checked the whole process of the oil transportation of the system, and made full preparations for the "testing battle" of the secondary machine .
-
National Energy Group's polypropylene products won the UL Environmental Statement Verification Certificate
Time of Update: 2022-09-13
Shanghai, China - Today, K4860, K4918 and K4925 high-melting index transparent injection plastic products developed by National Energy Group have been authorized to use the UL Environmental Declaration Verification (ECV) mark.
-
National Technology Biodegradable Modified Materials Obtained DIN CERTCO Authoritative Certification
Time of Update: 2022-09-13
National Science and Technology said that in the future, it will adhere to the implementation of the national low-carbon environmental protection policy, actively promote the innovation and application of biodegradable plastics, strive to solve the pollution problem of waste plastic packaging from the source, and continue to contribute to the green and sustainable development of China's economy and society.
-
【Tender】Hangzhou Xiaoshan International Airport Lufthansa Air Foods Co., Ltd. Degradable Knife and Fork Bag Procurement Project
Time of Update: 2022-09-13
Double-layer dry paper towel: 270*270mm (±2mm), pure virgin pulp paper, density 22g/㎡ Packaging suitable for refrigerationThree-piece set of fork and spoonFork and spoon integrated: material, fully biodegradable PLA length: 16cm, handle width 1.
-
The cracking furnace of PetroChina Guangdong Petrochemical ethylene unit was successfully capped
Time of Update: 2022-09-13
In the cracking furnace construction, a total of 64 convection section modules and 128 frames were hoisted into place.
In the cracking furnace construction, a total of 64 convection section modules and 128 frames were hoisted into place.
-
Dongming Petrochemical focuses on using polyethylene and polypropylene to develop high-end new material products
Time of Update: 2022-09-13
. Dongming Petrochemical has researched and formulated a "three-step" development strategy centered on "improving the industrial chain project, reducing oil and increasing chemical engineering, and green chemical new material engineering" and the core development strategy of Dongming Petrochemical in the next ten years .
-
Fujian's "14th Five-Year Plan": Bio-based degradable plastics such as PLA and PHA will be developed
Time of Update: 2022-09-13
The industry has become a new pillar of the modern industrial system in Fujian Province The "Planning" takes improving the ability of industrial innovation to solve the "stuck neck" problem of industrial development as the core task, and takes the concentrated advantageous resources to carry out major breakthroughs as the leading path, promotes the integration, clustering and ecological development of strategic emerging industries, and integrates strategic emerging industries.
-
allnex held the groundbreaking ceremony of the high-performance industrial resin project with an annual output of 138,000 tons
Time of Update: 2022-09-13
The world-class industrial environmental protection resin production base is expected to be completed and put into operation in 2022 Allnex's new production base is located in Dushan Port Economic Development Zone, Pinghu City, Jiaxing, Zhejiang Province, covering an area of about 150 mu.
-
Yulong Island Refining and Chemical Integration Project launched the "Hundred Days Attack" campaign!
Time of Update: 2022-09-13
On the morning of November 28, the swearing-in meeting for the construction of the Yulong Island Refining and Chemical Integration Project was held in Yulong Island, Longkou City, Yantai . The confere
-
2021 Top 500 Chinese Petroleum and Chemical Enterprises Released
Time of Update: 2022-09-13
In his speech, Li Shousheng, Secretary of the Party Committee and President of China Petroleum and Chemical Industry Federation, deeply analyzed the new changes in the development environment of China's petrochemical industry during the "14th Five-Year Plan" period, the status quo and gaps of corporate competitiveness and innovation capabilities, and how to speed up the improvement.
-
Sinopec spent more than 7 billion yuan to acquire PBT, PBAT and other businesses, and continued to deploy new chemical materials!
Time of Update: 2022-09-13
, lay out the fields of new energy and new materials for photovoltaic power generation, and cooperate in the development of high-end photovoltaic film materials, which will meet the domestic demand for high-end products On December 18, 2020, Sinopec Capital announced that it would invest in Changzhou Baijiasei Thin Film Technology Co.
-
This supermarket and market in Zhelin Town, Shanghai is the first to achieve 100% use of biodegradable shopping bags
Time of Update: 2022-09-13
It was learned at the scene that in addition to the full use of biodegradable shopping bags in the Xinsi Qimao Market, in the Asian seafood supermarket on the other side, all the roll bags in the bulk area and the fresh area have also been replaced with degradable ones.
-
Baling Petrochemical's o-cresol resin production hit a new high
Time of Update: 2022-09-13
. For a long time, the large deviation of the solid content of the o-cresol unit resulted in poor liquid separation effect, more waste polymer, and viscosity fluctuation, which affected the one-time pass rate of the product, and required repeated batching, which increased the energy consumption of the device .
