-
Maoming Petrochemical: New breakthroughs in the fourth quarter of polypropylene products
Time of Update: 2022-08-21
In the fourth quarter, the polypropylene workshop of Maoming Petrochemical Chemical Division strengthened technical research to improve the competitiveness of the device, and completed the high-transparency impact-resistant polypropylene product PPB-MT16 for medical syringes and ternary copolymerized aluminized corona layer cast film F4708 throughout the year6 The first trial production of a new brand .
-
BASF doubles polymer dispersion capacity in India
Time of Update: 2022-08-21
The increase in capacity is aimed at satisfying customers demand and support their growth in the region, ” said Jeff Knight, Senior Vice President, Dispersants and Resins Asia Pacific, BASF ” said Jeff Knight, Senior Vice President, Dispersants and Resins Asia Pacific, BASF .
-
The first batch of nylon 66 colored yarns of the subsidiary of Pingmei Shenma Group successfully rolled off the production line
Time of Update: 2022-08-21
" The person in charge of the company introduced that the project adopted large-capacity polymerization plus chip spinning and multi-end spinning technology for the first time in China, as well as intelligent manufacturing technologies such as automatic doffing, automatic transportation, and three-dimensional storage, equipped with spinning oil fume The oligomer high-efficiency recovery device realizes intelligent, green and efficient production .
-
The polypropylene market is in deep despair and the market outlook is unstoppable
Time of Update: 2022-08-21
Terminal enterprises lack purchasing enthusiasm, and polypropylene is going further and further on the road of rebound In the current half of December, the polypropylene market has reacted in a mess.
-
Topstar and German MS Group launched 5-year strategic cooperation
Time of Update: 2022-08-21
"Asian General Agent Agreement"Mr. Wu Fengli, Chairman and President of Topstar, Mr. Thomas Schulz, CFO of MS Group, Mr. Xiong Shaolin, General Manager of Topstar's Automotive Equipment Division, and senior representatives of both parties attended the signing ceremony .
-
Lamborghini conducts research on carbon fiber composites on the International Space Station
Time of Update: 2022-08-21
S. National Laboratory on the International Space Station and overseen by the Houston Methodist Institute to analyze the response of five different Lamborghini-produced composite materials to extreme stresses induced by the space environment in order to Consider future use of these materials in cars built by Lamborghini and in the medical field The launch was part of a testing campaign sponsored by the U.
-
Chemical and UV Resistant These Materials Create Custom Solutions for White Goods Sealing
Time of Update: 2022-08-21
Internal seals, dishwasher seals, hose fittings and white goods internal gaskets, This series of products outperforms soft PVC, has rubber-like elasticity, but does not have the limitations of rubber in design and processing.
-
Covestro and GAC collaborate on electric concept car lightweight seat
Time of Update: 2022-08-21
The back panels of the concept car's front seats are made of Covestro's Maezio™ continuous fiber-reinforced thermoplastic composite (Image source: GAC Group)Environmentally friendly and recyclableEnvironmentally friendly and recyclableFrom a CMF (color, material, finish) point of view, the design of the concept car interior is inspired by nature .
-
The customs newly released a batch of returned "foreign garbage" involving less and less plastic waste
Time of Update: 2022-08-21
96 tons of waste plastics Recently, the Foshan Customs Office in Gaoming, a subsidiary of Guangzhou Customs, seized a batch of prohibited solid wastes suspected of entering the country through false names .
-
Who will deal with the 50 million takeaways every day and the massive "white garbage"?
Time of Update: 2022-08-21
In the pursuit of efficiency in modern life, take-out has gradually evolved into the mainstream catering consumption habits of urbanites, and take-out garbage has also become a major source of urban environmental pollution - the use of disposable plastic lunch boxes has gradually increased, mixed with kitchen waste.
-
Covestro 3D prints thermoplastic films via film extrusion
Time of Update: 2022-08-21
. Jonas Kuen\zel from the Additive Manufacturing Technology Development Department explains: “The throughput of thin-film printheads is significantly higher than that of filament printheads .
. Jonas Kuen\zel from the Additive Manufacturing Technology Development Department explains: “The throughput of thin-film printheads is significantly higher than that of filament printheads .
-
Baofeng Phase III 500,000 tons/year coal-to-olefin project started, setting sail on the road to high-end
Time of Update: 2022-08-21
, Ltd. 500,000 tons/year coal-to-olefin project Project site: Ningxia Yinchuan Ningdong Energy and Chemical Industry Base-Ningdong Base Modern Coal Chemical Industry Demonstration Zone-Linhe Comprehensive Industrial Park Area A Construction content: Using coal as raw material, pressurized gasification, transformation and purification of pulverized coal for methanol synthesis production, producing 1.
-
Rongsheng Petrochemical's 40 million tons/year refining and chemical integration project (phase I) was fully put into operation
Time of Update: 2022-08-21
China's largest refining and chemical project, Rongsheng Petrochemical's 40 million tons/year refining and chemical integration project (Phase I), was fully put into operation on December 30, and the completed production capacity has reached 20 million tons .
-
Solvay: China's high-performance materials market has unlimited opportunities
Time of Update: 2022-08-21
Focus on high performance materialsFocus on high performance materials Kadri believes that China's high-performance materials market is vast and has unlimited business opportunities, which can provide many opportunities for the development of Solvay's high-performance materials industry .
-
Preparation of high-performance plastic alloys from waste textiles
Time of Update: 2022-08-21
With the improvement of people's living standards, more and more waste textiles are produced China's annual production of waste textiles can reach 20 million tons.
-
The ethylene unit of Gulei Refinery and Chemical Integration Project has been awarded the title of "Standardized Chemical Site" of the whole plant
Time of Update: 2022-08-21
On December 31, the ethylene unit of the Gulei Refining and Chemical Integration Project, which was built by the Tenth Construction Company of Refining and Chemical Engineering, won the mobile medal
-
Petrochemical "leading" technology to the world
Time of Update: 2022-08-21
The green and high-efficiency million-ton ethylene complete technology development and industrial application project that won the 2019 Petrochemical Federation Science and Technology Progress Award , driving the output value of downstream related industries to exceed one trillion yuan, and the cracking technology and catalysts are also exported to foreign countries, and finally realize the leap of China's ethylene technology .
-
Propane dehydrogenation to polypropylene suddenly made a loss in the cold winter, what does it mean?
Time of Update: 2022-08-21
A period of about 40 days According to the survey, the current loss of propane dehydrogenation (PDH) to propylene process is only affected by short-term factors.
-
DSM sets sustainability goals for Dyneema performance fibers
Time of Update: 2022-08-21
Number of people benefiting from protection - 40 million by 2023Number of people benefiting from protection - 40 million by 2023Number of people benefiting from protection - 40 million by 2023 DSM continues to raise the bar with Dyneema® high-performance fibers for healthier and safer working conditions, especially for individuals such as first responders, law enforcement officers, frontline operators of heavy industry and sports enthusiasts everywhere Protective clothing and equipment .
-
[Shinei Group] Whole Plant Planning Case-Pharmaceutical Industry
Time of Update: 2022-08-21
The whole plan integrates water, electricity, gas and central raw material processing systems In 2019, our company reached a cooperation with the company and planned a whole plant plan of 7 injection blowers for it.
