-
SONGWON announces a global price increase for its phosphorus-based polymer stabilizers
Time of Update: 2021-10-19
Songwon Industrial Co. Ltd. recently announced that due to the skyrocketing cost of raw materials, it will increase the price of its phosphorus-based polymer stabilizer
-
LANXESS expands Asia's light-tryptamine antioxidant capacity
Time of Update: 2021-10-19
We hope to use the additional capacity to strengthen our leading market position in the Asia-Pacific region and meet the growing needs of customers .
-
Tianshi Group's 16,000-ton wax emulsion project was officially put into production-to create a comprehensive competitive advantage in the supply chain
Time of Update: 2021-10-19
>This project marks that Yangzhou Tianshi has become the largest domestic polyethylene wax refining/oxidation/emulsification industrial chain covering an integrated factory coating online coatingol. com</span
-
Discussion on the Influence of Different Loose Agents on the Performance of Powder Coatings
Time of Update: 2021-10-19
The test results from Table 1 show that:① Adding a certain amount of loosening agent to the powder coating system can significantly improve the flow index R of the powder coating.
-
CNOOC Changzhou Research Institute listed and transferred the equity of Hualing Paint Co., Ltd.
Time of Update: 2021-10-09
"Headquarters", in December of that year, the Economic and Trade Office of the State Council approved the establishment of "Hualing Paint Co.
-
Study on the curing parameters of gas catalytic combustion infrared curing powder coatings
Time of Update: 2021-09-29
Studies have shown that when using catalytic infrared to cure this kind of powder coating, as the curing temperature increases, the time required for the complete curing of the coating is reduced, which is consistent with hot air curing.
-
Pigment selection and dispersion in water-based ink
Time of Update: 2021-09-29
②Transparent pigments print good quality printed products, such as metal foils, labels and paper, which require transparent and glossy printing inks, and often use particle school pigments as colorants .
-
Powder coating yellowing and countermeasures
Time of Update: 2021-09-28
Table 2: Effect of adding anti-yellowing agent 180°C 200°C 220°C b valueb valueb value Polyester/epoxy1.
-
The difference between dispersant and surfactant
Time of Update: 2021-09-28
surfactants are not dispersant coatings online coatingol. com . In addition to acting as a dispersant, surfactants can also act as detergents, wetting agents
-
Is the film-forming properties of water-based coatings film-forming additives determined by emulsions or additives?
Time of Update: 2021-09-28
When the amount of emulsion or water dispersion is large and the Tg of the polymer is high, the amount of the film-forming assistant should be large.
-
Research on Application of High Acid Value Polyester Resin in Dry-mixed Matting Coating
Time of Update: 2021-09-11
of BETP on polyester resin and its dry-blended matting powder coating>As shown in Table 2, the acid value of the synthesized polyester is controlled between 51~53mgKOH/g, from A1 to A3. <br
-
Have you solved the delamination problem of water-based coatings?
Time of Update: 2021-09-03
affects the can opening effect, but also changes the performance of the paint . >Severe hard precipitation may cause the paint to be scrapped and unusable
-
Application of all-water ink in intaglio printing on plastic film
Time of Update: 2021-08-13
the organic solvent which accounts for about 30% to 70% in traditional solvent-based inks . Using water-based emulsion as a binder, adding nano-scale color paste, water-based additives through
-
The opening rose 155.6% on the first day!
Time of Update: 2021-08-04
% on the first day to report 31. 00 yuan, with a total market value of 2. 793 billion yuan . >>Baolijia outstanding paint emulsion manufacturer has
-
Meijia’s 200,000-ton liquid epoxy project is changed, and the supply of raw materials for Swanson will not be affected
Time of Update: 2021-07-30
sales revenue has been growing steadily year by year. At present, there are sufficient orders, production capacity has been fully saturated, and equipment has been in full capacity production for a long time. The existing production
-
ACEMATT® matting powder is used for the matting of water-based coatings (Part 1)
Time of Update: 2021-07-28
When ACEMATT® matting powder is added to high-gloss water-based coatings, the viscosity may decrease, but after a period of storage, the post-thickening is obvious .
-
Advantages of water-based inks in the printing of plastic products
Time of Update: 2021-07-28
to industry standards, the ink has high color density and low viscosity (except for silk screen, etc. ) is a good ink . This is related to the raw materials selected by the ink manufacturer
-
The construction of the Badfu Jiangmen project has started, containing 150,000 tons/year of water-based alkyd + epoxy resin!
Time of Update: 2021-07-28
>The Bad Fu South China Comprehensive Production Base project plans to invest a total of 5 billion yuan, covering an area of 400 acres, and constructing coating online coatingol
-
The 160,000-ton water-based emulsion and coating solvent project was signed in Yilan Development Zone!
Time of Update: 2021-07-27
The signing ceremony for the 160,000-ton water-based emulsion and paint solvent project of Chunwei Chemical was held in the conference room on the third floor of the Economic Development Zone .
-
[Literature Interpretation] How to prepare high-performance epoxy emulsion with narrow particle size distribution and good storage stability, this article tells you!
Time of Update: 2021-07-27
Through the chemical modification method, it is not difficult to prepare a water-based epoxy emulsion with stable storage and small particle size .
