Characteristics and construction of swing granulator

The characteristics and structure of the swing granulator show that 1 The swing granulator is a kind of swing action with a rotating cylinder Through the screen, the wet powder raw materials can be grinded into particles, and it can also be widely used and crushed to become ready-made particles 2 In the aspect of chemicals, it is used to grind the mixed powder into particles, dry them for pressing tablets, and crush the blocks condensed during storage or formed during chemical processing In the food industry, it is used to treat candy and sugar mixture, wheat tooth milk and other products In other industries, such as ceramics, plastics and other mixtures become molding particles 3 It is not suitable for solid, liquid, slurry or grinding 4 The mesh number of mesh screen shall be prepared by the user according to the particle size requirements Instructions for swing type particle mechanism 1 The fuselage is an independent cuboid, which is composed of three parts: bearing frame, reducer and frame The charging hopper is connected with the bearing frame and extends out of the machine The front end of the frame is designed to extend out, reach the ground widely and stably, so it does not need to be installed and can be placed for indoor use 2 Particle manufacturing device: the horizontal rotating roller device is under the hopper, and there are bearing supports at the front and rear It is driven by rack to make reverse rotation The front bearing seat of the end face is movable When assembling and disassembling, only three screws are unscrewed, and the front bearing seat and the rotating drum can be extracted in turn The two ends of the rotating drum adopt symmetrical convex coupling, which is not restricted by the reverse direction and is convenient for installation and disassembly 3 Screen clamping pipe: the device is made of steel pipe on both sides of the rotary drum, with a long groove in the middle, and both ends of the screen are embedded in the groove Turn the hand wheel to wrap the screen on the outer circle of the rotary drum, and the hand wheel is blocked with ratchet to support, and the tightness can be adjusted 4 Reduction gearbox: it is driven by worm gear with a speed ratio of 1:30 The gearbox can store engine oil to ensure that the gear rod, gear and worm gear are well lubricated and noiseless The outer end of worm gear is equipped with an eccentric rod to drive the gear rod to move back and forth, and the gear shaft meshed with the gear rod is in reverse rotation motion 5 Base motor: the motor mounting plate is connected with the base hinge, and the other end is hinged with the nut When turning the upper hand wheel of the base, adjust the screw rod rotation and the nut to drive the motor plate up and down, and adjust the tension of the triangle belt The above is the introduction of "characteristics and construction instructions of swing granulator" I hope it can help you and look forward to cooperation with you! Wish you a happy life!