Construction of the "Harunoki" power station will begin

Construction of the "Harunoki" power station will begin
.
The power plant will be built 10 kilometers from the central area of Mito City, Ibaraki Prefecture
.
The site area is about 130,000 square meters, and there are households in the surrounding area
.
The power station as a whole is divided into three blocks, of which the photovoltaic panels in two areas are set up and power generation
begins.

The total number of photovoltaic panels exceeded 20,000, with 10,000 in the remaining region
.
The three regions began generating electricity
in January 2017.
The power generation capacity of each region is 2.
8MW, for a total of 8.
4MW.

The annual power generation is expected to be 8.
8 million kWh
.
This is equivalent to the electricity usage
of 2,400 households.

The plant was built
by the Looop Group, which develops and sells photovoltaic power generation systems.
The electricity generated will be sold
to TEPCO through a renewable energy fixed-price purchase system.
The two areas that have already started operation began transmitting electricity
on March 30 and April 1 respectively.
In 2013, the company obtained fixed-price acquisition certification at a purchase price of 36 yen/kWh
.
The power generation capacity of these three regions will be certified in 2012 for a purchase price of 40 yen
.

There are three types of photovoltaic panels, which can be used
according to each part according to the demand.
The first part is monocrystalline silicon (maximum power generation is 275W), the second part is polysilicon (260W), and the third area entering the construction project will use double-sided glass monocrystalline silicon (280W).

These three modules will be used depending on the power generation and aging effects
.

In particular, photovoltaic modules with double-sided glass will be constructed
through an anti-aging design.
The previous product will be covered
with the back of the photovoltaic and resin-type felt cloth.
In this regard, we use a structure covering the same thickness of glass inside and outside to prevent malfunctions through water, heat, shock
, etc.
It is characterized by a small failure rate and a long
service life of panel components.

Prevent disasters through afforestation and drainage equipment

The setting angle of the photovoltaic will be unified to 15 degrees
through the entire power station.
LOOOPD's photovoltaic power generation system will build a foundation such as concrete, and set up a platform by embedding a single pipe in the ground
.
Harunoki PV Power Station will use the same single tube to set up photovoltaic panels
on the bench.

There are residential buildings in the area around the power station, which affects the urban landscape and creates awareness
of disaster prevention.
It occupies a lot of surrounding soil, builds dikes, and rainwater does not flow out of the park
.
In addition, the embankment part will be afforested, planting dangui and azaleas, and it will be difficult to see the area around the power station after the
trees grow.

About 20 years ago, the residential development park
was transferred by a real estate company.
Because the original purpose was to develop forest land
.
However, a nearby residential development is planned to improve the drainage system
.
The structure of the adjustment pond where rainwater flows through drainage pipes in the occupied area
.
Therefore, the three areas where the photovoltaic panels are installed will build permeable pools
in underground water harvesting.
Ibaraki Prefecture is rich in sunshine resources and has high
photovoltaic production.
Among them, the Kinu River, which flows through the prefecture, burst its embankment in September 2015 and suffered a major disaster
.
In order to reassure nearby residents, disaster prevention measures for photovoltaic energy are indispensable
.