Jianghan Drills carefully calculates the benefits of digging

China Petrochemical News Network reported on July 31, Jianghan Petroleum Engineering Drilling Company 50808JH drilling crew engineering chief Li Ang collected the oily dirty rags from the drill floor, tank surface, and engine room.
Secondary utilization reduces oil-based waste disposal fees
.

This year, the team has insisted on cost control, technology acceleration, reform and innovation, and a good profit experience.

Control benefits from management

“The cost of wells is now being pushed down lower and lower, and the profit margins are also squeezed into thin wings.
Only by strict cost management can we control the loss of benefits
.

” Team leader Li Qiru said that during each drilling of the team, The city organizes cadres and employees to hold a cost pre-control decomposition meeting, implements "single well cost dynamic analysis", manages single well material indicators in blocks, and divides costs into various teams.

"Every penny spent now is my own
.

" Wan Fuluo, a second-team derrick worker who has worked in a repair shop, used his free time to repair an electric welding machine and a chain hoist

The team implements "single well cost dynamic analysis", manages indicators in blocks, tracks cost dynamics in a timely manner, and increases cost control rewards and punishments.
The cost of completion of wells is reduced by a 1% reward and punishment system, and costs are linked to personal benefits and wages.
, To form a good atmosphere of "everyone thinks about costs, calculates costs, and controls costs"
.

Li Yang, an engineering technician, will carefully check the drill bit that is taken out every time, comprehensively judge whether it can be reused, and then clean it and save it
.

At the end of the horizontal section of Well Jiaoye 12-S3HF, the old drill bit was put into the well for the second time to complete the remaining footage, reducing the cost of receiving a new drill bit, and receiving a reward of 500 yuan

　　Create benefits from speed increase

　　"I'll go to the control room and stare at it.
Go to the noodles to see if there is any iron filings coming back
.

"

　　On the evening of June 15th, data showed that there was a risk of touching the casing.
Li Qiru stayed in the control room, observing various parameters such as torque and pump pressure, and instructed employees to operate carefully.
After a few hours of hard work, the risk was smoothly resolved
.

　　The team set up a technical research team to divide the work of technical management personnel and clarify their responsibilities.
Before each well is drilled and key and key links, the staff should be informed.
Each key node process must have on-site supervision and guidance by technical team personnel
.

During the second operation of the propeller, the mud chief Xia Hui and Chen Biao commanded the site to remind the small crew of the low-viscosity time to join, to ensure the pump's water supply efficiency and the normal use of the vibrating screen during the propeller rotation, and to achieve normal drilling during the propeller rotation

　　During the construction, the team took care of accident prevention, time control, process control, and risk control by optimizing production organization, refining technical instructions, and strengthening emergency drills
.

Affected by adverse conditions such as fracturing interference from adjacent wells and power outages, all four wells completed this year have achieved excellent results

　　Benefit from innovation

　　"The installation of a filter screen in the diaphragm pump can effectively prevent debris from entering the mud and ensure production safety
.

" During an inspection, Li Ang saw the small group cleaning the mud during an inspection.

　　In order to stimulate employees' enthusiasm for innovation and efficiency, the team carried out a comprehensive collection of innovative achievements such as safe production, energy saving and environmental protection, cost reduction and efficiency enhancement, and through small reforms, while achieving safe production, reducing costs and expenditures
.

　　The construction of safety standardization has always been the team's leading product, and has been praised by Party A many times
.

The spraying pipeline must not only meet the safety supervision requirements of Party A, but also be beautiful.
Each well must be fixed with cement foundation piers
.
The foreman Lei Yu led the small team to weld the movable choke and kill manifold base pier with iron plates, and also installed a height-adjustable clip.
The movable base pier not only meets the standard but also saves time and effort
.

　　As soon as I got on the drill floor, I saw the projection lamp installed by Mr.
Liu Yuangao, the mechanical and electrical executive, throwing a red prompt of "No one is allowed to stand under the guide rail" to remind employees to pay attention to safety
.
Their small changes can be seen everywhere in the well site: safety belt suspension devices are installed on the gate slope to prevent falling; the rope arranging device is equipped with a fixed splint to reduce wear; the dead rope and the drill floor are in contact with the splint instead of rubber.
.
.

　　This year, the team completed more than 10 small reforms, saving more than 200,000 yuan in cost
.
(Shen Xin)