Northwest Oilfield "Three Optimizations" Achieve Double Improvement of Engineering Quality and Efficiency

Sinopec News Network reported on July 6, the Taklimakan Desert was scorching hot
.

At 10:30 in the morning, at the 200,000 m3 gas station at the TP-1 metering station in the Tahe Oilfield, following instructions from Chen Zhen’s commissioning command, the flare vent system, station separator, desulfurization unit, dehydration unit, and export metering The pressure regulating skid was put into operation in an orderly manner, which marked the official commissioning of the 200,000 m3 gas station at the TP-1 meter transfer station, a key project for stabilizing oil and gas in the third oil production plant of Northwest Oilfield in 2021

"Benefits are the balance of oilfield exploration and development.
The 200,000 m3 gas station at the TP-1 metering station in Tahe Oilfield has been meticulously crafted from three aspects: plan design optimization, construction process optimization, and process dynamic optimization.
, Engineering construction double effect and increase at the same time
.

" Lin Deyun, deputy manager of the production and operation room of the third oil production plant, reckoned with the benefits generated by the project, his face was full of joy

Optimize the plan and create a project to increase reserves and production efficiency

In 2021, the clarion call for the construction of 10 million-ton oil and gas fields in Northwest Oilfield will sound.
Faced with the severe situation of diminishing production capacity and insufficient resource replacement in the old area, the third oil production plant will tap the potential, intensive cultivation, and go all out to stabilize oil and gas
.

The TP-1 metering station 200,000 square gas station aims to further release the natural gas production capacity of the 12-8 well area, solve the operational contradiction between the gathering and transportation system and oil reservoir development, and promote the acceleration of the battle to increase reserves and production of the third oil production plant

"After the project is put into operation, the natural gas output of the third oil production plant will be increased from 850,000 cubic meters per day to 1.
05 million cubic meters, with a daily increase of 200,000 yuan
.

" Lin Deyun said

Optimize process, tap potential, save and expand profit space

"The production capacity release project in the 12-8 well area requires 6 new large-scale oil and gas processing equipment, two main pipelines for external transmission between the 200,000 cubic gas station and the No.
3 joint station, totaling 30 kilometers.
During the construction of the project, we are based on saving The project cost, to ensure the best quality and the best benefit principle, under the premise of fully optimizing the process, a deactivated pipeline on this section of the oil and gas line will be re-tested, repaired, and used after anti-corrosion treatment, saving the project cost by 1,000 More than ten thousand yuan
.

" Wang Zhan, deputy director of the production operation office of the third oil production plant, pointed his finger and worked out an account

　　"To create a benefit project, we must enter into the details.
During the construction process, we combine the reality and the wisdom of optimizing the construction process is remarkable
.

" On-site safety guardian Liu Yue pointed to the 200,000 cubic meter gas station at the TP-1 meter transfer station The supporting project TP12-Q4 gas-gathering station venting and liquid separation skid venting process, explaining the small modification of the process technicians here

　　Optimize the process to fight the intense heat and speed up the project

　　"Today, many high-risk operations such as hoisting operations, hot operations, and high-altitude operations are being carried out at the same time.
We start work early and finish work late to avoid high temperature periods and optimize the procedures, so that many construction units are in good order.
Enter the site and perform efficient construction
.

” This is the scene of the on-site construction of the 200,000 m3 gas station at the TP-1 transfer station on July 1.

　　On this day, the 200,000 m3 gas station at the TP-1 meter transfer station in Tahe Oilfield was in the sprint stage before it was put into operation.
Scene of the battle
.

　　Time is benefit
.

The construction of the 200,000 cubic meter gas station for the TP-1 meter transfer station coincides with the rainy, sandy, and hot summer.

　　(Tian Hongyuan)