Pioneering preparation center electromechanical research and development cable intermediate head protective shell

Recently, the 10th team of mechanical and electrical installation of the Pioneer Preparation Center has developed and designed the protective shell of the cable intermediate head, which effectively reduces the probability of
the normal use of the cable due to the cable falling or uneven force, which causes the cable intermediate head to be pulled off and damaged.

When laying the cable, the installation of the cable intermediate head is to connect the cable of each section, in order to make it a necessary process of a continuous line, the protection of the cable intermediate head is directly related to the normal use
of the cable.
Therefore, the protection of the middle head of the cable is very critical when laying the cable, which will directly affect the installation quality
of the project.
In the past, due to the lack of professional protection devices, the installed cable middle end was exposed, such as the cable falling or the two ends of the cable pulled together, it was easy to damage the cable intermediate head
.

In order to solve this problem, the team used waste steel pipes to design and make the cable intermediate head protective shell, which is a flat steel
that cuts a waste DN159 welded pipe into two sections and welds holes on both sides.
For installation, snap the protective case on the middle head of the installed cable, and then bolt the protective case through the perforated flat steel to fix the protective case
.
The use of this device greatly reduces the force at the middle head when the cable is pulled and backlogged, effectively increases the tensile and compressive resistance at the middle head of the cable, and plays a good role
in protecting the middle head of the cable.