Synthetic Lubricant Additives in the Microchannel Reactor of Nanhua Institute

Sinopec News Network reported on July 15, the microchannel reactor synthesis Y2010A pilot project undertaken by Sinopec Nanjing Research Institute of Chemical Industry Co.
, Ltd.
successfully passed the scientific research project evaluation organized by the Ministry of Science and Technology of Sinopec
.

Lubricating oil additive Y2010A as a general antioxidant and extreme pressure agent, suitable for various lubricating oils and greases, and can be used for crank lubricating oil, engine oil, gear oil, various lubricating greases, metalworking fluids, etc.
at high temperatures , The market is extensive
.

As a special type of continuous flow tubular reactor, the microchannel reactor generally has a channel diameter in the micron or millimeter level, a large specific surface area, and a good heat and mass transfer effect
.
This type of reactor has accurate material control, short feed time and high reaction efficiency

Nanhua Institute of Chemical Industry independently developed, designed and built a microreactor pilot plant with a throughput of 2000t/a.
The plant was used to investigate and optimize various process conditions, while separation, purification and condition optimization were carried out to obtain better process conditions for the pilot plant.
The yield of the obtained product is greater than 90%, and the purity is greater than 98%.
The various indicators stipulated in the contract have been completed, and the quality of the developed products has reached the indicators of similar superior products
.
Compared with the traditional process, the operation of the microchannel reactor is simple and easy to control, and the high-grade product rate is greatly improved

It is understood that the project has applied for 4 national patents.

(Chen Bin Kong Weiwei)