The first "ICM injection compression process + nano-coating" model will be released soon

Following the announcement of the details of the Lenovo Z6 on June 26, on July 2, Chang Cheng, vice president of Lenovo Group and Lenovo mobile phone shopkeeper, released the detailed configuration diagram of the Lenovo Z6 to be released on July 4 on Wei.

ICM process with nano-coating, the body is thin and textured

Judging from the published information, the Lenovo Z6 hardware is equipped with a 39-inch OLED screen with a screen ratio of 91%, the processor is the Snapdragon 730, and it has the world's lightest body with a 4000mAh battery and 15

The ICM process adopted by Lenovo Z6 compensates the "shrinkage effect" of the material through the vacuum compression process, and builds a smooth and even transition wall thickness on the double arc surface in a shorter time, creating a dazzling sense of transparency and shiny light effe.

The penetration rate of injection molding imitation glass has increased steadily, and the industrial chain is ready to go

Figure injection molding process flow (source network)

Injection compression molding is the key technology of the glass-like injection molding process for the plastic back cover of mobile phon.

The comparison of different ICM forming technologies in the picture, the picture comes from Sobeide

In 2019, the processing yield of injection molding imitation glass is further improving, the market penetration rate is increasing steadily, and related models of mobile phone terminals have been launched one after anoth.

Figure OPPO Realme 3's one-piece injection molding body, reducing the processing cost of the body and improving the texture of the body