echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Chemicals Industry > Chemical Technology > The national standard revision kick-off meeting for full-power wind energy converters drafted by Sungrow was held

    The national standard revision kick-off meeting for full-power wind energy converters drafted by Sungrow was held

    • Last Update: 2022-11-24
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    On April 11, the national standard for full-power wind energy converters "GB/T25387.
    1-2010 Wind Turbines Full Power Converters Part 1: Technical Conditions" and "GB/T25387.
    2-2010 Wind Turbines Full Power Converters Part 2 Test Methods" revised and kick-off meeting was held in Hefei, and more than 40 experts from the wind standard committee, electric power research institute, wind power turbine factory, wind energy converter equipment side and other industries and enterprises attended the meeting

    In addition to the two national standards for full-power converters, the revision is also "wind turbine doubly-fed converter Part 1: Technical conditions" and "wind turbine doubly-fed converter Part 2: Test method" and other national standards for doubly-fed wind energy converters, Sungrow as the main drafting also participated in the revision work
    .

    Wind energy converter standard is the equipment development, manufacturing compliance of the "constitution", the above national standards have not adapted to the rapid development of the wind power industry, for this reason, the participating experts around the grid friendliness, motor support, environmental adaptability and other dimensions of the four standards to revise and study
    .
    With long-term accumulated experience in the design and application of wind energy converters, Sungrow put forward a series of revision suggestions at the meeting, actively promoted the improvement of standards, and was unanimously recognized
    by everyone.

    Sungrow has been focusing on wind energy converter business for more than ten years, adhering to the mission of "let everyone enjoy clean electricity", deeply cultivating technological innovation, taking completely independent intellectual property rights as the core driving force, the product spectrum fully covers the two major product series of full-power converter and doubly-fed converter, the technical route from low-voltage 690V to medium-voltage 3300V, power level from 850kW to 10MW, has accumulated rich application experience in dealing with ultra-low temperature, ultra-high altitude, high thunderstorm, high salt spray, high humidity and heat and other special installed environments of wind power.
    It provides strong technical support
    for the revision of the national standard for wind energy converters.

    On April 11, the national standard for full-power wind energy converters "GB/T25387.
    1-2010 Wind Turbines Full Power Converters Part 1: Technical Conditions" and "GB/T25387.
    2-2010 Wind Turbines Full Power Converters Part 2 Test Methods" revised and kick-off meeting was held in Hefei, and more than 40 experts from the wind standard committee, electric power research institute, wind power turbine factory, wind energy converter equipment side and other industries and enterprises attended the meeting

    Sungrow

    In addition to the two national standards for full-power converters, the revision is also "wind turbine doubly-fed converter Part 1: Technical conditions" and "wind turbine doubly-fed converter Part 2: Test method" and other national standards for doubly-fed wind energy converters, Sungrow as the main drafting also participated in the revision work
    .

    Wind energy converter standard is the equipment development, manufacturing compliance of the "constitution", the above national standards have not adapted to the rapid development of the wind power industry, for this reason, the participating experts around the grid friendliness, motor support, environmental adaptability and other dimensions of the four standards to revise and study
    .
    With long-term accumulated experience in the design and application of wind energy converters, Sungrow put forward a series of revision suggestions at the meeting, actively promoted the improvement of standards, and was unanimously recognized
    by everyone.

    Sungrow has been focusing on wind energy converter business for more than ten years, adhering to the mission of "let everyone enjoy clean electricity", deeply cultivating technological innovation, taking completely independent intellectual property rights as the core driving force, the product spectrum fully covers the two major product series of full-power converter and doubly-fed converter, the technical route from low-voltage 690V to medium-voltage 3300V, power level from 850kW to 10MW, has accumulated rich application experience in dealing with ultra-low temperature, ultra-high altitude, high thunderstorm, high salt spray, high humidity and heat and other special installed environments of wind power.
    It provides strong technical support
    for the revision of the national standard for wind energy converters.

    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.