echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Chemicals Industry > Petrochemical News > The working principle of electric submersible oil pump oil recovery

    The working principle of electric submersible oil pump oil recovery

    • Last Update: 2023-03-17
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    Rod pump oil production is the most commonly used mechanical oil production method, it has the advantages of simple equipment, small investment, convenient operation and maintenance, etc.
    , but the displacement is limited, and it is difficult to
    apply in inclined wells.
    Therefore, at present, the use of large-displacement electric submersible pump (referred to as electric submersible pump, electric pump) for oil production is an important means
    to maintain stable production and high yield of oilfield.
    Electric submersible pump oil production belongs to the rodless pump oil production method, that is, the pumping equipment
    that does not require a sucker rod to transmit power.

    The electric pump device is composed of three parts:
    downhole, middle and surface.
    The underground part mainly has four major parts: electric submersible pump, motor, protector and separator, which are connected to the lower end of the pipeline into the well: the middle part is mainly a special cable for transmitting electric energy; The ground floor part is mainly composed of two parts:
    a control screen and a transformer.

    After the transformer on the ground converts the grid voltage into the voltage required for the electric submersible pump device, the electric energy is input into the control screen, and then transmitted to the underground motor through the cable: the motor turns the electrical energy into mechanical energy to drive the electric submersible pump and the separator to rotate together: the separator draws the liquid in the well into the separator through the suction inlet, and after the gas-liquid separation, the well liquid is lifted into the electric submersible spring: The electric submersible pump transmits mechanical energy to the well liquid, improves the pressure energy of the well liquid, and thus lifts the well liquid to the surface
    through the oil pipe.

    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.