-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of trimethylolpropane for industrial use
This standard is applicable to the production, inspection and sales of trimethylolpropane obtained by condensation reaction of formaldehyde and n-butyraldehyde as raw materials under the action of a catalyst .
Molecular formula: C 6 H 14 O 3
Structural formula: CH 3 CH 2 C(CH 2 OH) 3
Relative molecular mass: 134.
2 Normative references
The clauses in the following documents have become clauses of this standard after being quoted in this standard
GB/T191-2008 Packaging, Storage and Transportation Graphic Mark (ISO780:1997, MOD)
Preparation of GB/T 601-2002 Chemical Reagent Standard Titration Solution
Preparation of preparations and products used in GB/T 603-2002 chemical reagent test method (neq ISO6353-1: 1982)
GB/T617-2006 General method for determination of melting point range of chemical reagents (neq ISO6353-1: 1982)
GB/T6283-2008 Determination of water content in chemical products Karl Fischer method (general method) (neq ISO760:1978)
GB/T6678-2003 General Rules for Sampling of Chemical Products
GB/T6679-2003 General Rules for Sampling of Solid Chemical Products
GB/T6682-2008 Analytical laboratory water specifications and test methods (ISO3696:1987, MOD)
GB/T7531-2008 Determination of Ignition Residues of Organic Chemical Products (neq ISO6353-1: 1982)
GB/T8170 Numerical Rounding Rules and the Expression and Judgment of Limit Values
GB13495-1992 fire safety signs
3 requirements
3.
3.
Table 1 Technical requirements