-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
In the automotive industry, long fiber reinforced plastics have been widely used for a long time, but the industry still faces the problems of high cost of pellets, insufficient fiber content and fiber length, which hinder the innovation process of automotive technology
.
During the Yizumi Wujiang Factory Cloud Open Week (September 14-18), DirectPro-DIM will demonstrate the production of automotive fan frames.
The UN1000DP two-platen injection molding machine is equipped with a fiber shearing metering and feeding device to realize the long fiber direct injection molding process.
:
The fiber breakage rate is greatly reduced, and the glass fiber length of the final product of longer fiber aggregates is increased by 50%;
The product has enhanced mechanical properties and strength, and can replace long-fiber pellets, which can reduce raw material costs by 30%-50%;
According to different product requirements, individualized selection of fiber length (5-100mm), content (0-50%) and material combination;
Optimized on the basis of standard injection molding machines, it can still be used for standard injection molding processes
.
*The data on the page comes from Yizumi's in-plant testing, and the specific data of the equipment is subject to the customized equipment
.
If you want to visit the site of the Open Week event and watch the demonstration on the spot, please contact the Yizumi sales manager in your area
.
"Cloud" event registration entrance
Yizumi 2020 Cloud Open Week event announcement will be continuously updated, please pay attention
.
In the automotive industry, long fiber reinforced plastics have been widely used for a long time, but the industry still faces the problems of high cost of pellets, insufficient fiber content and fiber length, which hinder the innovation process of automotive technology
.
During the Yizumi Wujiang Factory Cloud Open Week (September 14-18), DirectPro-DIM will demonstrate the production of automotive fan frames.
The UN1000DP two-platen injection molding machine is equipped with a fiber shearing metering and feeding device to realize the long fiber direct injection molding process.
:
The fiber breakage rate is greatly reduced, and the glass fiber length of the final product of longer fiber aggregates is increased by 50%;
The product has enhanced mechanical properties and strength, and can replace long-fiber pellets, which can reduce raw material costs by 30%-50%;
According to different product requirements, individualized selection of fiber length (5-100mm), content (0-50%) and material combination;
Optimized on the basis of standard injection molding machines, it can still be used for standard injection molding processes
.
*The data on the page comes from Yizumi's in-plant testing, and the specific data of the equipment is subject to the customized equipment
.
If you want to visit the site of the Open Week event and watch the demonstration on the spot, please contact the Yizumi sales manager in your area
.
Or you can scan the QR code below to sign up for the "Cloud" event launched at the same time, and watch it at zero distance
.
"Cloud" event registration entrance
Yizumi 2020 Cloud Open Week event announcement will be continuously updated, please pay attention
.
In the automotive industry, long fiber reinforced plastics have been widely used for a long time, but the industry still faces the problems of high cost of pellets, insufficient fiber content and fiber length, which hinder the innovation process of automotive technology
.
Yizumi's DirectPro-DIM long fiber direct injection molding solution can replace fiber-reinforced engineering plastics, simplify production processes, reduce raw material costs, and improve product mechanical properties and strength, helping the automotive industry to release higher-quality cost dividends
.
During the Yizumi Wujiang Factory Cloud Open Week (September 14-18), DirectPro-DIM will demonstrate the production of automotive fan frames.
The UN1000DP two-platen injection molding machine is equipped with a fiber shearing metering and feeding device to realize the long fiber direct injection molding process.
:
The fiber breakage rate is greatly reduced, and the glass fiber length of the final product of longer fiber aggregates is increased by 50%;
The product has enhanced mechanical properties and strength, and can replace long-fiber pellets, which can reduce raw material costs by 30%-50%;
According to different product requirements, individualized selection of fiber length (5-100mm), content (0-50%) and material combination;
Optimized on the basis of standard injection molding machines, it can still be used for standard injection molding processes
.
*The data on the page comes from Yizumi's in-plant testing, and the specific data of the equipment is subject to the customized equipment
.
If you want to visit the site of the Open Week event and watch the demonstration on the spot, please contact the Yizumi sales manager in your area
.
Or you can scan the QR code below to sign up for the "Cloud" event launched at the same time, and watch it at zero distance
.
"Cloud" event registration entrance
Yizumi 2020 Cloud Open Week event announcement will be continuously updated, please pay attention
.
