A brief introduction to the hot air cycle dry oven safety operating procedures.

Hot air cycle drying oven to steam or electric heating as a heat source, in the fan forced cycle, so that the air layer flow through the baking disk and material heat transfer, and take away the temperature of the material, according to the different requirements of the material and different state of the drying process, can adjust the ratio of air discharge and circulation, so as to achieve the drying speed and thermal utilization double increase. It is a good choice for GMP certification.
the following small series of a brief introduction to the hot air cycle dry oven safety operating procedures, as follows: 1, oven in accordance with the nameplate on the specified temperature range to use, the oven must be grounded well.
2, ovens shall not be stacked near the oil basin, oil barrels, cotton yarn, cloth chips and other flammable items, not in the oven next to washing, painting and painting and other work.
3, after gasoline, kerosene, alcohol, banana water flammable liquid washed parts and painted items, should be placed at room temperature for 15 to 30 minutes, until the vast majority of flammable liquid volatile, can be put into the oven to bake, indoor should pay attention to ventilation.
4, before opening the oven, you must lose power.
can't leave during the warming process.
5, the oven drying box before work must open the ventilation gate to prevent explosion.
6, to prevent other objects from falling into the bottom of the oven and contact with the resistance wire caused by a short circuit.
7, ovens in the work should not carry out cleaning work, not to wipe with gasoline.
8, before use to check the control device, indicating whether the signal is sensitive and effective, electrical line insulation is intact and reliable.
9, shall not store articles, such as tools, equipment parts and oil volatiles, in the oven.
10, non-metallic items into the oven to heat up, must be carried out in accordance with the process procedures.
.