A quick look at the operating considerations of several tablets.

Several tablets mainly on the tube bottle-like automatic bottle, several pieces of filling.
this-machine production can change the backward appearance of manual operation, can improve the production efficiency level of mechanical packaging, to achieve pollution-free production effect, fully in line with GMP requirements.
the machine is widely used in food, pharmaceutical, chemical and other industries.
the structural principle of the device mainly in the disc sieve several pieces on the basis of the addition of some technical measures, the fall of the use of high-speed rotating tube track, so that the film rotates, in space to form a fixed horizontal state, a piece fell into the tubular bottle.
a brief introduction to the operation of several tablets need to pay attention to what matters, as follows: 1. the height of the number of discs should be the same as the length of the capsule or capsule head slightly higher than a few discs, not too low or too high, otherwise in the rotation will break the capsule, too low can be paded with scraping the middle high part and the middle hole to match the shaft after the abandoned disc, too high please use the bed to process a number of under the plate of the circle .).
2. The capsules in several holes are not all full and do not press the micro-switch, otherwise the capsule will be damaged when you turn to the position of the ring.
capsules in several holes are not all full can be used brush the capsule, so that several holes have capsules.
3. The ring on the number of plates must be adjusted to the appropriate height, too low will break the capsule.
4. Capsules must be locked completely, the length is uniform, there must be no non-conforming capsules.
5. Several discs must not be heavy pressure, otherwise it can not work properly;
6. Capsules deformed by moisture must not be counted in the machine.
through the above content, I hope to understand a number of tablets to help.
.