echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Resin News > About heat-resistant epoxy powder coatings

    About heat-resistant epoxy powder coatings

    • Last Update: 2020-10-01
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Text: unethicalfat, or forforwa filler, flexible consisting performance ratio total resistance (200 to 600 degrees C) powder .
    foreboding
    powder powder resistance period receiving 200 degrees Celsius or higher high temperature,film non- color, unsastwable , ability retention this physicalperformancepowder.
    deskpowder fee-resistantperformance ratiohigh, Tajimahigh, early outerand deskperformance unsustacable, solidification temperature high, and requiredobtained period period high temperature film equivalent trouble
    fat-main body-resistant performance comparable desk fat difference, however-like performance ratio whole through reformability Japanese subscription right solidification and filler, the same possible good resistance . By the way, - powder and - obtained.
    1 powder-resistant performance requirements
    1.1 resistance
    resistance most important performance finger , insignity products indefinite period stay one high temperature under use, cause, resistance or period Japanese short-term Two.
    root elephant and directional performance demand, natural reformation fat, solidificationwa filler, talent aesthetic purpose.
    1.2 performance
    comprehensive early Japanese-style performance. Yui Charged received constant limit system for , tsuji desk performance ratio general powder charge-like required descending low;
    1.3 Antiseptic performance (comprehensive chemical resistance performance)
    fat preservative performance ratio preferred, causal, powder -charge full- directional requirement.
    1.4
    comprehensive flatness, light , , etc. performance. It is said that it is an elephant place district where it is not possible to use the . A skin with in general.
    , , the great capital of , and are completely more possible. It is to compare color, especially shallow color, and one point point point . It possible to understand the of this joining , etc. to prevent .
    1.5 qualitative
    Yu's unreleased high temperature , fat Tg high, causal qualitative this . 2 powder powder and
    2.1 fat
    for general A fat. -resistant fat:
    (1)
    old point 65 degrees C, 201,Tg-224 degrees C; good. :
    (2)
    point 110 to 115 degrees C, the same amount 240 to 275,Tg . Low melt viscosity, force .
    :
    (3) [YX-4020H (Japanese oiling sier / C)] :
    (4) 4-4' - base water sweetening (TGDM) [ELM434 (Sumitomo Chemical Japan)] the same amount 117 to 134, the highest Tg .
    :
    2.2 Greasy reforming
    2.2.1 Desk fat reforming
    reformability fat, ready-made lowgreasive inner force, fat softness resistance to high temperature resistance.
    active end group (Si-OH, - NH2, group, etc.) given greasive group, group anti, produced fitting stage high-height.
    example solution-given active desk -like solution-subscribed three- bottle, subscribed Sanot , temperature transmission
    mixed a fat desk based the yokko , and the purpose was changed. Example:
    powder no 500 to 700 degrees Celsius high temperature non-peeling.
    2.2.2 () compound
    : - powder powder, powder distribution and performance:
    fruit compound 30
    fat 70
    -type -type 50
    nikko 2
    good
    initial shear adhesion / (kg-cm-2) 150
    80

    2.3 rice filler reforming fat
    for original distributed co-ordinant U.S. SiO2 fat combination material, fat good action; high performance.
    U.S. SiO2 fat method yes lower general dried U.S. SiO 2 in the solution, super vocal wave ri 30 min.
    solution oil desolation solution temperature of 130 degrees C 1 h, cooling is possible immediately. U.S. de-soil reforming, fat-resistant resistance, and -resistant combustible performance.
    2.4 solidification
    solidification is large shadow . Generally, it to resistance solidification acid general.
    ratio- solidification or less scrupulous:
    (1) uniform four-scale acid (PMDA) sul-point 280 degrees C,-shaped temperature 290 degrees C.
    (2) 4 (BTDA) 227 degrees C, temperature of 280 degrees Celsius.
    (3)
    : : R1-, R2 Oto.
    chemical name : Otobi -2- one-scale scapic acid (trade name Curezo Isle 2MZ-CNS, Japan Shikoku Kasei ).
    (4) fat (FB fat)
    acid, sand, twin A Wago aqueous solution raw material, under NaOH . Type :
    Commercial F series solidification available fat resistance 300 to 400 degrees Celsius high temperature, and .
    2.5 Filler
    Powder Powder Has Performance Large action, for Filler, Publication Powder performance.
    2.5.1
    For desks for most. color are available for (Sheperd Color ). powder-resistant easy color, under high ; fat .
    2.5.2 Filler
    General Desk Filler Preferred Resistance, For Ash powder ( acid ) Japanese mother powder. Two can use Germany, and use of a constant proportional formulation.
    Type : Ash Powder Nyad M400 (Nyco Corporation), Gold Mother Surorite 325 HK
    , -resistant, -high hardness, polishing resistance, chemical qualitative Japanese weather resistance, dose 5% to 30%.
    2.5.3 Low-
    low-to-powder 10 .mu.m;
    general ,specific weight 0.4, Rumikoku PQ Koji students, Q-Cell 7040S, etc. Usage 10% to 50%. a small amount of that can be joined is . Low- powdery available acid (BaZr2F10) alternative.
    3 powder powder example
    (2) bias - solidification powder distribution and performance under:
    4
    high-temperature combined articles posist, required out of each direction performance Tono sign combination required powder fee, presence constant trouble .
    for fat for the same solidificationwawa filler, more controlled and undeterminable high temperature demand (200 to 600 degrees C) powder .
    powder -use house products: Nyo furnace, warm desk, Daiko rate lamp , and desk -like high temperature part, Nyo drainage pipe, high temperature furnace, petrochemical equipment, desk, , Uwo
    powder and are available, and are covered in the direction. For , oil or combustible combustible , combustible powder powder.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.