Anti-corrosion coatings on the inside and outside walls of oil tanks

China Coatings Online News:Formula NameInside and Outside Walls of Oil Tanks
Anti-corrosion Coatings Formula TableFormula ItemsMatchingOther special
formula descriptiondetailed formulation
1 A part
2E44 (6101) 25.99
3 toluene 3 12.37
4 butanol 3.09
5 iron red 29.12
6 mica (325 flakes) 7.46
7 Graphite (98.5%) 2.37
8
talcum powder
(400 items) 1.75
9
bentoite
0.74
10 B
11NX-2041 177.11
12 Total 100
Recipe Note
The first to third items in the formula are weighed according to the ratio and put into the premixed tank for dissolution, stirring 30-60min (Time to be adjusted according to temperature and raw material conditions, winter appropriately shortened) until epoxy resin dissolved in the solvent into a transparent liquid, and then weighed the next few materials into the premixed tank stirring about 30min, and then put into the grinding machine for grinding, in the source for fine testing, qualified after filling, testing viscosity, and appropriate adjustment, filtration, packaging.
B can be leveled as needed, can be used directly or can be diluted with solvents such as ethanol, the dosing is calculated according to the situation.
: all kinds of raw materials to control water content, the use of dry raw materials, especially in summer conditions more attention, water content is too large will affect the performance of the coating.
the following sub-groups are weight%
the U.S. Madeleine