Anti-wear coating anti-wear paint increases the wear resistance of the material surface

China Coatings Online News Information
Boiler water-cooled wall, is a serious material for wear, often water-cooled wall surface is affile by the wall gray flow, serious cases will affect the operation of the entire power plant, wear-resistant coating engineers pointed out that in other conditions, the hardness of the coating for the coating wear resistance measures, so the inner wall coating must have a high hardness and waterproof performance. Using modified technology, a new type of high hardness wear-resistant ceramic coating has been developed, suitable for the above high temperature friction corrosion conditions, temperature resistance is 150 degrees C, 600 degrees C and 2600 degrees C, respectively, the hardness of the coating can reach more than 9H, can effectively prevent lining wear corrosion too fast.
In order to further improve the high temperature wear and corrosion resistance of wear-resistant coatings, research and development personnel after a large number of experiments, wear-resistant waterproof ceramic coatings are developed in cooperation with the army of new energy-saving coatings, wear-resistant waterproof coatings, its main wear-resistant bone, ultra-micro-powder and inormeric polymer dispersion combination, coating cured particles tightly accumulated, so there is no greater macro defects, Large volume density, its normal temperature strength of up to 210Mpa or more, raw materials mainly use ion compounds and some synthetic co-price compounds, ion bonds and co-price bonds are strong binding bonds, and the binding system due to the use of composite reinforcement measures and special treatment, the formation of chemical binding, so the strength and stiffness is very large, can effectively resist the high-speed impact and shear stress. ZS-911 wear-resistant waterproof coating temperature resistance due to the use of acid and alkali-resistant special raw materials, coating performance is stable, will not react with the media, while wear-resistant waterproof coating raw materials are mostly high-temperature synthetic materials, crystal development, structural integrity, coating paper film, not affected by environmental factors, is one of the best inert materials, so it can effectively resist fluid powder media friction and various chemical corrosion, coating resistance to high temperature.
the surface of the coating material with wear-resistant waterproof coating effectively increases the hardness and wear resistance of the surface of the material, prolongs the use time of the material and maintains the performance of the material.