Automatic eye drops filling machine installation and maintenance

Shanghai Shenggang automatic eye drops filling machine is an automatic machine, so the dimensions of easy-to-pull bottles, bottle pads and bottle caps are required to be unified
.

First, you must first use the crank handle to turn the machine to see if there is any abnormality in its rotation
.

Second, when adjusting the machine, the tools should be used properly, and it is strictly forbidden to use too large tools or excessive force to remove parts to avoid damage to the parts or affect the performance of the machine
.

Third, every time the machine is adjusted, the loosened screws must be tightened, and the machine can be driven only after turning the machine with the crank handle to check whether its action meets the requirements
.

The machine must be kept clean, and it is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine.
Therefore, it is necessary to remove the liquid medicine or glass debris in time during the production process of the machine
.

Fourth, all parts of the machine surface should be cleaned once before the shift, and clean lubricating oil should be added to each activity department
.

It should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blown with compressed air
.

Fifth, after the machine is unpacked, first check whether the random technical data is complete, and whether the machine is damaged during transportation, so as to solve it in time
.

Install and adjust the feed assembly and discharge assembly according to the outline diagrams in this manual
.

Sixth, add new lubricating oil to each lubricating point
.

Seventh, of course, the last step is to check the operation of the machine.
Use the crank handle to turn the machine to check whether the machine is running in the correct direction (counterclockwise when facing the main shaft of the motor).
The machine must be protected and grounded
.