-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
I, commonly usedculturebase 1, LB if necessary with 1NNaOH (-1ml) adjust pH to 7.0, and then fill the water to 1L. Note: < a href"">" agar plate needs to add agar powder 12g/L, upper agar plate to add agar powder 7g/L.
2, SOB culturer water to replenish volume to 1L. Divide into small parts of 100ml and sterilise at high pressure. After the medium has cooled to room temperature, add 1 ml of sterilized 1mol/L magnesium chloride to every 100 ml of small servings.
3, SOC medium
4, TB culturer components dissolve. Cool to 60 degrees C, add 100 ml of sterilized 170mmol/LKH2PO4/0.72mol/LK2HPO4 solution (2.31g KH2PO4 and 12.54gK2HPO4 dissolved in sufficient water, resulting in a final volume of 100ml. Autocultension or sterilization with a 0.22um membrane).
5, 2×YT culturer if needed to adjust pH to 7.0 with 1NNaOH (-1ml), then fill the water to 1L. Note: Agar plate to add agar powder 12g/L, upper agar plate to add agar powder 7g/L.
6, YPD culturer water to replenish the volume of 1L, autocultension. It is recommended to add 1.6 g tryptophan per liter of medium for tryptophan nutritional deficiencies prior to autocultension, as the YPD medium is a tryptophan-restricted medium. In order to make the plate, 20g agar powder needs to be added before autoculsion is sterilized.
2, commonly usedantibiotic ampicillin (100mg/ml)
carbenicillin (50mg/ml)
methicillin (100mg/ml) kanamycin (10mg/ml) chloramphenicol (25mg/ml) streptomycin (50mg/ml) nalidixicacid (5mg/ml) tetracyline (10mg/ml) Tips: If 10mg/ml canamycin is made, first in a salt water bottle orbottle to add 10 ml of double steamed water, high pressure, cooled to add 0.1g canamycin, mix well, filter membrane filter totest tube, and then 1 ml / tube into the EP tube for use. |