Basic cleaning and maintenance methods of high speed blister packaging machine

The high-speed blister packaging machine must be operated by fixed personnel, who can master the start-up and bag making procedures, simple instrument debugging, parameter change, etc.; the mechanical instrument debugging personnel must be strict with Yujie manufacturer, who can master the instrument performance, work procedure, operation mode, working state, common troubleshooting and handling; it is strictly prohibited to operate without personnel Operate the computer meter Daily maintenance must ensure that the inside and outside of the computer instrument box are clean and dry; regularly check that the wiring terminals are not loose or falling off Ensure that the circuit and gas path are unblocked Basic cleaning includes: 1 After shutdown, the metering part shall be cleaned in time, such as sugar, Isatis powder, salt, etc it is necessary to ensure that the blanking plate and rotary table are cleaned in each shift to prevent corrosion 2 For the heat sealer body, it should be cleaned frequently to ensure that the seal texture is clear 3 The photoelectric tracking head, that is, the electric eye, should also be cleaned regularly to ensure the small error of cursor tracking 4 The scattered materials on the material tray shall be cleaned in time to keep the parts clean 5 Regularly clean the dust in the electric control box to prevent poor contact and other faults The transmission and moving parts of the newly installed machinery must be checked, tightened, oiled and maintained within one week of use; after that, they must be checked and maintained regularly every month Basic maintenance: 1 Check the screws of all parts of the packaging machine regularly to avoid loosening 2 Pay attention to the waterproof, moisture-proof, anti-corrosion and rat proof of electrical parts The electric control cabinet and wiring terminal shall be kept clean to prevent electrical failure 3 When the machine is stopped, the two heat sealing rollers shall be in the open position to prevent the packaging materials from being damaged by scalding 4 Regularly add oil to the gear mesh of the packaging machine, the oil filling hole of the bearing with seat and the moving parts for lubrication When filling the lubricating oil, please take care not to drop the oil on the drive belt, so as to prevent slipping, loss of rotation or aging damage of the belt.