-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The EK1101 EtherCAT coupler is a link
between the EtherCAT protocol at the fieldbus level and the EtherCAT terminal module.
The coupler converts the passed message from Ethernet 100BASE-TX to an E-bus signal representation
.
A station consists of a coupler and any number of EtherCAT terminal modules, which are automatically detected and displayed individually in the
process image.
Special features: Connection technology: 2 x RJ45 socket Connection length: up to 100 m Three ID switches for variable topologies Number of EtherCAT terminal modules in the overall system: up to 65,535 EK1101 with two RJ45 sockets and three hexadecimal ID switches
.
The upper Ethernet interface is used to connect the coupler to the network; The lower socket is used for optional connection to other EtherCAT devices
in the same network segment.
A group of EtherCAT components can be assigned an ID through the hexadecimal ID
switch.
The group can then be located anywhere in the EtherCAT network
.
Therefore, variable topologies are easy to implement
.
In addition, EtherCAT connectors or EtherCAT extensions can be used to extend or set up linear or star topologies
.
Both system and field power are 24 V DC and are provided
directly on the coupler.
The connected EtherCAT terminal module provides the current
required for communication from the supplied system voltage.
The coupler is available up to 5 V and 2 A
.
If higher currents are required, power terminals
such as the EL9410 must be integrated.
Field power is delivered to individual I/O components
via power contacts up to 10 A.
Technical dataHousing data reaches the apex Technical dataThe task within the EK1101EtherCAT system couples the EtherCAT terminal (ELxxxx) to the 100BASE-TX EtherCAT network and authenticates the data transmission medium Ethernet/EtherCAT cable (Cat.
5) with maximum
distance between shielded stations.
100 m (100BASE-TX) EtherCAT terminal count up to 65,534 maximum
type/number of peripheral signals 。 4.
2 GB addressable I/O points configurable number of IDs 4096ProtocolEtherCAT latency approx.
1 microsecond data transfer rate100 megabits/s bus interface2 RJ45 power supply24 VDC (-15 %/+20 %)US current consumption70 mA + (∑ E-bus current/4)Current consumption from U PLoad current supply E-bus2000 mA power supply contacts maximum
。 24 V DC/max.
10 A Galvanically Isolated 500 V (Power Contact/Supply Voltage/Ethernet) Weight approx.
105 gOperating / Storage Temperature -25.
.
.
+60 °C/-40.
.
.
+85 °CEMC Immunity/radiation according to EN 61000-6-2/EN 61000-6-4 relative humidity 95 %, non-condensing vibration/shock resistant according to EN 60068-2-6/EN 60068-2-2-27 protection
。 Rating/Installation PositionIP20/Variable Approval/Marking CE, UL, ATEX, DNV GL, IECEx, cFMus Ex mark ATEX: II 3 G Ex nA IIC T4 GcIECEx: Ex nA IIC T4 GcEx tc IIIC T135 °C DccFMus: Class I, Division 2, Groups A, B, C, DClass I, Zone 2, AEx ec IIC T4 GC Technical DataHousing DataArrival Apex Housing DataEK-44-8pin Design Form Compact Terminal Housing Material with Signal LED Polycarbonate Size (W x H x D) 44 mm x 100 mm x 68 mm mounted on a 35 mm DIN rail in accordance with EN 60715 Label wiring solid conductor (e), flexible conductor (f) and ferrule (a) with lock by side-by-side installation double slot and key connection marking BZxxx series solid conductor (e), flexible conductor (f) and ferrule (a): screwdriver actuated spring connection section s*: 0.
08.
.
.
2.
5 mm²,st*: 0.
08.
.
.
2.
5 mm²,f*: 0.
14.
.
.
1.
5 mm² connection cross-section AWGs*: AWG 28.
.
.
14,st*:AWG 28.
.
.
14,f*:AWG 26.
.
.
16 stripping length 8.
.
.
9 mm current load power contact I max: 10 A