echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Coating classification: epoxy silane crosslinker

    Coating classification: epoxy silane crosslinker

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: Introduction: the epoxy silane crosslinker, xr500, is mainly applicable to the aqueous system containing carboxyl and amino groups The reaction mechanism is that the epoxy group in the crosslinker reacts with the hydrophilic group, carboxyl and amino groups of the aqueous resin; the alkoxy group reacts with water for hydrolysis condensation to form the silica bond, thus greatly improving the adhesion and water resistance of the coating film to the substrate Epoxy silane crosslinking agent (xr500) is a new type of environmental friendly and non-toxic coating additive It is particularly amazing that the application period of the water-based system with epoxy silane cross-linking agent xr-500 is abnormally long, which can reach one year at room temperature Therefore Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form It is a new type of coating, because of its own advantages and more and more known by people Let's introduce Akzo Nobel Powder coating Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment Since the introduction of this technology, powder coating has been able to continue to maintain the Coating home news: Introduction: the epoxy silane crosslinker, xr500, is mainly used in water-based systems containing carboxyl and amino groups The reaction mechanism is that the epoxy group in the crosslinker reacts with the hydrophilic group, carboxyl and amino groups of the water-based resin; the alkoxy group reacts with the water through hydrolysis condensation to form the silica bond, so as to greatly improve the adhesion and water resistance of the coating film to the substrate Epoxy silane crosslinking agent (xr500) is a new type of environmental friendly and non-toxic coating additive It is particularly amazing that the water-based system with epoxy silane crosslinker (xr500) has an abnormally long application period, which can reach one year at room temperature, so it can be prepared into a stable one-component coating Features: technical index type of the project: colorless and transparent liquid specific gravity 1 molecular weight 288.46 refractive index 1.45 flash point / ℃ 104 boiling point / ℃ > 300 active ingredient /% 100 recommended formula: ① the recommended addition amount of epoxy silane crosslinker xr-500 in metal coating is 1% of the solid content; ② It is suggested to add 2% of the solid content in leather coating, 2% of the solid content in plastic coating and 1.5% of the solid content in glass coating; ⑤ It is suggested to add 0.5% - 1.2% of the solid content of epoxy silane crosslinker in architectural coatings; ⑥ it is suggested to add 2% of the solid content in general waterborne wood coatings, 3% for floor coatings, 1% for textile coatings, and 3% for special washing water requirements It is suggested to use: ① the two-component can be directly added to the water-based system to replace isocyanate, aziridine and amine crosslinking agent; ② the pH value of the water-based system should be adjusted to 6-8 when the single component is used, which is conducive to long-term preservation; ③ the general addition amount of epoxy silane crosslinking agent xr-500 is 0.5% - 3% of the solid content of the resin, which can be appropriately added in special requirements; ④ When the epoxy silane crosslinking agent (xr500) is used, if it is difficult to disperse and dissolve, some non-ionic emulsifiers can be used for emulsification before adding Note: the epoxy silane crosslinker, xr-500, belongs to the environmental friendly and non-toxic crosslinker, which can be used at ease Once it contacts with the skin, it can be washed directly with soapy water or clear water Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.