Coating classification: heavy metal anticorrosive ceramic coating

Core tip: heavy metal anti-corrosion ceramic coating modified epoxy resin mixed with special ceramic powder, and can be cured at room temperature The technical core is to form a unique saccular ceramic by combining submicron ceramic particles and resin (each submicron ceramic particle is coated with resin, and finally tightly wrapped under the curing film) Because the shrinkage of ceramic components in the curing process is very small, the internal stress of the coating after curing is very small, and the small shrinkage and internal stress mean that the coating is more durable and tough There are three kinds of ceramic powders added to the coating, and their functions are as follows: 1) Close to the pipe wall, Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Coating House News: heavy metal anticorrosive ceramic coating is made of modified epoxy resin and special ceramic powder, and can be cured at room temperature The core technology is to combine submicron ceramic particles and resin to form a unique saccular ceramic (each submicron ceramic particle is coated with resin, and finally tightly wrapped under the curing film) Because the shrinkage of ceramic components in the curing process is very small, the internal stress of the coating after curing is very small, and the small shrinkage and internal stress mean that the coating is more durable and tough There are three kinds of ceramic powders added in the coating, which are: 1) close to the pipe wall, increase the bonding effect of the coating on the pipe wall, improve the coating life; 2) provide corrosion resistance and wear resistance for the coating, protect the pipe; 3) enhance the lubrication ability of the coating, reduce the wear of the coating, and extend the service life of the coating The heavy metal anticorrosive ceramic coating can be sprayed at room temperature, which is easy to operate, and the ceramic content in the coating is up to 80 %The above, supplemented by the improved epoxy resin, so the coating has the rigidity of ceramics and the toughness of resin at the same time, so that the coating has super smooth surface, strong impact resistance, excellent corrosion resistance and abrasion resistance, excellent wear resistance, corrosion resistance, high insulation strength and impact resistance The heavy metal anticorrosive ceramic coating does not need the bottom coating, but can be directly coated, which can effectively isolate the acid, alkali, salt medium and the seawater erosion It can be widely used in aviation, aerospace, petrochemical industry, automobile industry, marine shipping, wharf, sewage equipment, pressure vessel, electric gas equipment, concrete surface, plastic, composite materials and other industries and fields Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,