Coating knowledge: solvent based coating performance

Core tips: 1) coating quality: in the occasion of high decorative requirements, the fullness of water-based coatings usually can not meet the requirements of people, and solvent based coatings are often used to achieve high gloss coatings 2) Adaptability to various construction environments: for water-based coatings, the evaporation rate cannot be adjusted In order to obtain high-performance water-based latex coating, the temperature and humidity of the construction environment must be controlled In some harsh environments, such as the construction of exterior walls and bridges, it is impossible to create a temperature and humidity controlled condition manually, so the application of water-based coatings may be limited; on the contrary, the use of solvent based coatings may vary with the location and climate Application scope and advantages of roller ceramic coating Recommended introduction: the surface of ceramic rubber plate used for roller ceramic coating is cast into durable rubber plate by hundreds of independent small ceramic pieces Each ceramic piece has raised characteristics Under general conveyor belt pressure, thousands of unique cast bumps can produce positive traction, prevent slipping and extend the service life of conveyor belt roller At the same time, the bottom layer adopts high-quality rubber, which has strong elasticity and can play a good impact resistance role The scope of application of roller ceramic coating is one three six 83857180 (the same as V) 1 Roller coating in extremely harsh working environment 2 The belt joint is not suitable for fixing with iron buckle; 3 It is suitable for leather Coating home news: 1) coating quality: in the occasion of high decorative requirements, the fullness of water-based coating usually can not meet the requirements of people, high gloss coating mostly uses solvent based coating to achieve 2) Adaptability to various construction environments: for water-based coatings, the evaporation rate cannot be adjusted In order to obtain high-performance water-based latex coating, the temperature and humidity of the construction environment must be controlled In some harsh environment, such as the construction on the outer wall and bridge, it is impossible to create a temperature and humidity controlled condition manually, so the application of water-based coating may be limited; on the contrary, the solvent based coating can be used to control the solvent ratio with the change of location and climate to obtain high-quality coating 3) Solvent based coatings have a wide selection of resins: in solvent based coatings, almost all kinds of resins can be dissolved in solvents, so there is a wide choice Different resins have their own unique properties, such as polyurethane with excellent weather and chemical resistance, high gloss, wear resistance, etc., silicone resin with excellent heat resistance can be used as the base material for heat-resistant and weather resistant coatings, 4) cleaning problems Solvent based coating construction tools must be cleaned with solvent, which is harmful to human body and environment As long as the construction tools of water-based coating are cleaned with clear water, they are harmless to human body Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,