Coating process: preparation process of silicone heat-resistant and anticorrosive coating

It is suggested that the high temperature resistant and anticorrosive coating is composed of modified silicone resin as the base material, high temperature resistant and antirust pigments and fillers, auxiliaries and solvents The heat resistance of the coating can reach 3H / 550 ℃ when tested according to the national standard GB / T 1735-1979 (1989), and the coating can not lift up, peel off, crack, wrinkle, pulverize or melt; the salt spray resistance can reach 72h when tested according to GB / T 1771-1991; the hot and cold water resistance (550 ℃ × 1H) can reach 1 when tested according to GB / T 1771-1991 Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Coating home news: silicone high temperature resistant anticorrosive coating is based on modified silicone resin, with high temperature resistant anti rust pigments and fillers, additives and solvents The heat resistance of the coating can reach 3H / 550 ℃ when tested according to the national standard GB / T 1735-1979 (1989) The coating does not lift up, peel off, crack, wrinkle, pulverize or melt; Its salt spray resistance can be up to 72h when tested according to GB / T 1771-1991, and its hot and cold water resistance (550 ℃× 1H) can be up to 10 cycles without defects such as delamination, peeling, crack, wrinkling, pulverization and melting The raw materials of the coating are as follows: the reference formula of organosilicon high temperature resistant anticorrosive primer is as follows: coating house is focused on coating, diatom mud, paint coating, coating process, news information and coating of fireproof coating, diatom mud, paint coating, coating process, decoration knowledge and decoration effect map of fireproof coating,