-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Microwave dryer is a dryer, different from the traditional drying method, it is the overall heating, because the external heat is easy to dissipate, so its thermal conduction direction and water diffusion direction is the same.
1, microwave drying equipment waste fuel: if the insulation of the equipment is poor, it needs to improve its insulation performance, can be wrapped in a layer of insulation materials, if the dryer design or dryer furnace design problems, it needs to contact the manufacturer to solve.
2, microwave dryer material can not be sucked away: the reason is that the dryer equipment is not installed properly, the dryer leakage or installation is not correct;
3, the material wet and dry is not equal, may be the microwave drying equipment is not used properly, it may also be the microwave dryer material affected by low temperature into a cluster.
for the former, we should strengthen the technical training of operators to master the operation skills, if the raw materials in groups, you need to dry the raw materials broken, and then dry.
4, raw materials can not dry at once: the reason is that the microwave dryer is too small, and microwave dryer in the raw materials installed too much;
For a variety of reasons, the dryer can be replaced with a larger capacity of each loading time less, but also can increase the temperature of the microwave dryer, but this method is easy to cause a fire in the dryer, so you can also change the microwave dryer.
5, microwave dryer "fire": this may be because the dryer temperature is too high, causing the drying equipment to catch fire and burn, or it may be due to the dryer blocked caused by the "gun" phenomenon.
6, microwave dryer raw materials on fire: raw materials can not be sucked away caused by the dryer fire, or it may be that the dryer equipment is too small to achieve the drying effect and forced heating, resulting in fire, it is possible that microwave dryer equipment is not used properly.
is not a problem with the design principle of microwave dryer equipment.
For this reason, should check whether the dryer equipment is installed correctly, whether the air leakage or increase air pressure, the second reason, can be modified dryer, can also replace the capacity of the microwave dryer, for the operator do not understand, can be familiar with the microwave dryer, and re-learn the operation of microwave dryer precautions;
.