echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > Common knowledge of coating: operation skill of water-based coating spraying construction

    Common knowledge of coating: operation skill of water-based coating spraying construction

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Core tip: [news] in today's rapid development of the coating industry, all kinds of brands of coatings want to take the lead

    But among many coatings, water-based coating is still popular

    It is a new type of coating, which has been widely used by many people in the industry by using its own advantages

    Although this is the case, there are still many people who do not have a correct understanding of water-based coating, so there will be some misunderstandings in the use of water-based coating

    Next, we will For the use of water-based coating skills for you to introduce

    1

    Adjust the coating to the proper spraying viscosity with clean water to Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form

    It is a new type of coating, because of its own advantages and more and more known by people

    Let's introduce Akzo Nobel Powder coating

    Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products

    After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment

    Since the introduction of this technology, powder coating has been able to continue to maintain the Home of coatings news: [news] in today's rapid development of the coating industry, all kinds of brands of coatings want to take the lead

    But among many coatings, water-based coating is still popular

    It is a new type of coating, which has been widely used by many people in the industry by using its own advantages

    Although this is the case, there are still many people who do not have a correct understanding of water-based coating, so there will be some misunderstandings in the use of water-based coating

    Next, we will For the use of water-based coating skills for you to introduce

    1

    Adjust the coating to the proper spraying viscosity with clean water, and measure with the coating-4 viscometer

    The appropriate viscosity is generally 20-30 seconds

    If there is no viscometer for a while, visual inspection method can be used: stir the paint with a bar (iron bar or wood bar) and lift it up to 20cm height to stop for observation

    If the paint liquid continues to line in a short time (several seconds), it is too thick; if the paint liquid breaks off immediately from the upper edge of the barrel, it is too thin; if the paint liquid just stops at 20cm height, it will break and flow into drops immediately

    This viscosity is more appropriate

    2

    The air pressure is best controlled at 0.3-0.4 MPa (3-4 kgf / cm2)

    If the pressure is too small, the paint liquid will not atomize well, and the surface will form pockmarks; if the pressure is too large, it is easy to flow and hang, and the paint mist is too large, which wastes materials and affects the health of the operator

    3

    The distance between nozzle and object surface is generally 300-400mm

    Too close is easy to flow and hang; too far paint mist is uneven, prone to pockmarks, and the spray nozzle is far away from the object surface, causing waste in the way

    The specific distance should be adjusted according to the type of coating, viscosity and air pressure

    The spraying distance of slow drying paint can be a little longer, that of fast drying paint can be a little closer; when the viscosity is thick, it can be a little closer, when the viscosity is thin, it can be a little farther; when the air pressure is large, it can be a little farther, and when the pressure is small, it can be a little closer; the so-called near and far point refers to the adjustment of a small range between 10 mm and 50 mm, if it is beyond this range, it is difficult to obtain an ideal paint film

    4

    The spray gun can move up and down, left and right

    It is better to operate uniformly at the speed of 10-12m / min

    the spray nozzle shall be straight on the surface of the object for spraying, and oblique spraying shall be minimized

    When spraying to both ends of the object surface, the hand to pull the trigger of the spray gun should be loosened quickly to reduce the paint mist

    Because the two ends of the object surface are often subject to more than two spraying, which is the most likely place to cause sagging

    5

    When spraying, the next layer shall be pressed to 1 / 3 or 1 / 4 of the previous layer, so as to avoid leakage

    When spraying quick drying paint, it is required to finish spraying in sequence at one time

    The effect of re spraying is not ideal

    6

    When spraying in the open outdoor place, pay attention to the wind direction (it is not suitable for operation in case of strong wind)

    The operator shall stand in the downwind direction to prevent the paint mist from being blown to the sprayed paint film and causing unsightly granular surface

    7

    The spraying sequence is: hard first, easy second, inside first, and then outside

    First high place, then low place, first small area, then large area

    In this way, the spray mist will not splash on the sprayed paint film and damage the sprayed paint film

    Any object or thing is not perfect, and so is the water-based coating

    Although it has its own advantages, there are still many problems, but we can completely improve through the above process and technology, and some problems can be well prevented

    Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.
    Related Articles

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent Echemi's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.