Common knowledge of coating: precautions for construction of water in water multicolor coating

Core tips: water in water multicolor coating construction precautions: the whole wall is best one-time ingredients to avoid large color deviation 1 During spraying, the water content of the base surface shall be below 10% and the surface strength shall be above 0.4MPa; the ambient temperature shall be above 5 ℃ 2 Before construction, it is necessary to protect the surrounding areas 3 Each spraying process must be conducted after the previous spraying material is fully dried 4 Before each spraying process is dry and solid, it is necessary to avoid rainwater washing and dirt contamination 5 If the color requirements of the groove joint of the finished painted wall surface are the same as that of the colored intermediate coat, it shall be divided Paint agent, top 10 Chinese wall paint brands Recommended introduction: interior wall paint and exterior wall paint can achieve beautiful, clean and pleasant effects, but the effects in different environments are different, so the color of the paint will be different There are ten brands of Chinese paint, ten brands of global paint, ten brands of Chinese wall paint, and ten brands of Chinese paint, Famous trademark of Chinese paint and coating In private rooms, most of us choose according to our own personality, personal hobbies and living habits The younger generation will choose the interior wall paint with rich colors and bright colors, while the older ones will have some working experience Paint Home News: water in water multicolor paint construction precautions: the whole wall is best one-time ingredients, so as to avoid large color deviation 1 During spraying, the water content of the base surface shall be below 10% and the surface strength shall be above 0.4MPa; the ambient temperature shall be above 5 ℃ 2 Before construction, it is necessary to protect the surrounding areas 3 Each spraying process must be conducted after the previous spraying material is fully dried 4 Before each spraying process is dry and solid, it is necessary to avoid rainwater washing and dirt contamination 5 If the color requirements of the groove joint of the finished painted wall surface are the same as that of the colored intermediate coating, the process of dividing line planning and setting out shall be carried out after finishing the colored intermediate coating 6 The spraying operation of the intermediate coating for elastic modeling must be able to achieve the principle of complete covering 7 Before spraying the multi-color paint, it can be gently stirred with a clean round wooden stick, and it is forbidden to stir hard to avoid damaging the particles 8 It is better to use pressure tank for spraying of multi-color paint (special spray gun for water in water), and adjust the diameter and pressure of spray gun according to different texture requirements 9 When spraying large color block, remove the nut of outer nozzle 10 The groove tape shall be torn off before the multi-color paint is sprayed and dried 11 The multi-color paint is a pure water-based high-quality formula, which can not be diluted with water before spraying 12 Products shall be transported and stored in a stable and safe manner to avoid sunshine, high temperature and pollution Products should not be stored for a long time after opening, please use up within three months Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,