Common knowledge of coating: problems caused by paint brush construction to epoxy floor coating

Core tip: paint brush is made of pig pine, wool, wolf hair and synthetic fiber During construction, the paint brush will take the paint to the coated surface of epoxy floor paint, and spread the paint on the coated surface to complete the coating Therefore, when the paint brush is used for painting construction, it is easy to have paint defects such as brush marks, loss of light, sagging, uneven coating, wrinkling, rough or coarse particles One of the main causes of brush marks and light loss is caused by too much construction force Due to too much construction force, deep brush marks are formed, and the epoxy floor paint film cannot be well leveled, resulting in brush marks Second, construction technology is not familiar Paint knowledge how about Akzo Nobel Powder Coating Recommended introduction: powder coating is a kind of coating with different form from general coating, which is in powder form It is a new type of coating, because of its own advantages and more and more known by people Let's introduce Akzo Nobel Powder coating Akzo Nobel Powder coating is a cost-effective coating solution, which can be applied to different kinds of products After the treatment of static electricity and fire baking, a tough and durable coating surface will be formed, with the least impact on the environment Since the introduction of this technology, powder coating has been able to continue to maintain the Paint Home News: paint brush made of pig pine, wool, wolf hair and synthetic fiber During construction, the paint brush will take the paint to the coated surface of epoxy floor paint, and spread the paint on the coated surface to complete the coating Therefore, when the paint brush is used for painting construction, it is easy to have paint defects such as brush marks, loss of light, sagging, uneven coating, wrinkling, rough or coarse particles One of the main causes of brush marks and light loss is caused by too much construction force Due to too much construction force, deep brush marks are formed, and the epoxy floor paint film cannot be well leveled, resulting in brush marks Second, due to unskilled construction technology, too many times of back and forth brushing during construction, and still brushing when the wet film is in the semi dry state, resulting in the loss of leveling time and the formation of brush marks and light loss The reasons for the uneven coating and sagging of epoxy floor coating are as follows: during the construction, when the force is heavy, the coating is thin, and may leave unsmooth brush marks on the coating film, when it is light, the coating is thick and may cause sagging Excessive amount of oil dipped in the paint brush and too short time of oil absorption of the coating can also cause the defects of epoxy floor paint sagging Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,