Condensed condensing system energy saving product - spray mass transfer condenser

This is a new energy-saving product without cooling tower, circulation pump and traditional condensers The principle of energy saving is to use the heat exchange with phase change instead of the heat exchange without phase change The product has been invented by the state When water evaporates, the heat absorption effect with phase change is 56 times of that without phase change! For example, the traditional cooling water required for 2000L single effect concentration is 112t If the spray mass transfer condenser is evaporated to absorb heat by atomizing water, only 2T is needed This is a big mutation Considering the effective factors of atomization spray and the certain pressure factors required for atomization, the atomizing water pump used by the 2000L spray mass transfer condenser invented by the German medicine machine is 1.5Kw, the water consumption is about 10t/h, and the total condenser consumption power is 9.5Kw Theoretically, "the surface heat transfer coefficient of phase change heat transfer process is several times or even dozens of times higher than that of single-phase flow without phase change." The circulating cooling water in the traditional condensing system is replaced by the atomizing water of the spray mass transfer condenser, which does not require a lot of circulating water to save energy The two steam generated by the condensing tank will automatically enter the spray mass transfer condenser The latent heat of condensation released by it will be absorbed by the latent heat of vaporization when the atomizing water evaporates.