Confocal Raman microscopy should be paid attention to during use

The characteristic X-ray energy and wavelength emitted by different elements are different, so by measuring the energy or wavelength of X-ray, you can know what kind of element it is emitted, and conduct qualitative analysis
of the element.
At the same time, the characteristic X-ray intensity of an element emitted by the sample after excitation is related to the content of this element in the sample, so its intensity can be measured to quantify
the element.
The confocal Raman microscopy uses format hyperspectral imaging technology to realize high-speed synchronous measurement
of each spectral channel.
This technology combines hyperspectral data with the high speed of snapshot imaging, enabling instantaneous acquisition of hyperspectral images
across the entire field of view.
It can easily obtain the entire hyperspectral cube data in 1/1000th of a second, with powerful measurement and data processing software, and can realize UAV remote sensing measurement
without IMU 。 So what should I pay attention to when using confocal Raman microscopy? 1.
Before use, the light source needs to be warmed up for five to ten minutes, while ensuring the stability of the instrument power supply, ensure that each connection port is tightly connected when the experimental instrument is connected, try to avoid loose the operation of the interface during the experiment, and do not cause large vibration, because it is a highly sensitive instrument, if the instrument connection is loose, it will lead to errors
in the experiment 。 2, when using In order to avoid other irrelevant reasons to interfere with the detection process, then there must also be some requirements for use, do not operate the software too fast and frequent, such as scanning the background, one to two seconds later and then click the run button, when observing a certain segment or a specific wavelength and collecting data, first pause, and then proceed to the next step, if too fast, there may be no way to carry out the next operation, because the
product is not omnipotent 。 3.
After use, when turning off the light source, turn off the light first, let the cooling fan blow for another one to two minutes and then unplug the power; After disassembling the optical fiber connecting the light source and the instrument, cover the optical fiber head and optical fiber connector with a protective cap, keep it properly, and put the instrument in a
constant temperature drying box.