Constant temperature and humidity laboratory water leakage factors and solutions

Constant temperature and humidity laboratory water leakage factors and solutions: First, check out the leakage factors In fact, there are many reasons for the leakage of the constant temperature and humidity laboratory, such as the sealing of the water tank is not very good, or the water pipe is not connected well and the water pipe bursting is likely to lead to the leakage of
the test chamber.

Second, the treatment method 1, first of all, to check whether the floor of the constant temperature and humidity laboratory is flat, because the inclination angle will also lead to the imbalance of the wet bulb water pipe, so that there are water drops
.

2.
First check whether the water replenishment time of the test equipment is set too frequently, resulting in too much water, and it is necessary to check the water tank, water level box and humidifier
in turn.

3, the second is to check the waterway, check whether the water inlet valve is too large, resulting in too much water, if this is the case, you need to delay the time of replenishment to solve the problem
.

4.
Check whether the water level box on the right side of the test equipment is too high, resulting in too much
water flowing in.