Constant temperature and humidity test box controller (temi880) operating instructions!

Constant temperature and humidity test box controller (temi880) operating instructions! The controller is just like the human brain The quality of the controller directly affects the use and operation of the whole test box Jerry has always insisted on using the touch screen controller produced by Sanyuan of South Korea High control accuracy and good stability Temi880 color touch intelligent programmable temperature and humidity controller of constant temperature and humidity test box: imported from Korea, LCD touch panel in Chinese and English, drawing face-to-face input data, temperature and humidity can be programmed at the same time, backlight 17 sections adjustable, curve display, set value / display value curve Various alarms can be displayed separately When the fault occurs, it can be displayed on the screen to eliminate the fault and misoperation Multiple groups of PID control functions, precise monitoring functions, and displayed on the screen in the form of data Cycle setting: 9999 × 999 cycles can be executed, and 5 groups of independent partial cycles can be cut out Constant temperature and humidity test box control mode: adopt intelligent forward and reverse two-way synchronous output, including advanced slope control logic Programmable constant temperature and humidity tester data setting: touch dialog setting mode, simple and clear operation, built-in directory data management system Curve drawing: when the setting of temperature, humidity and time data is completed, it can be converted into the setting curve immediately, and the actual operation curve can be drawn during operation Time signal: 3 sets of time control output interfaces, with 10 kinds of time control modes, to facilitate the implementation of external drive module start / stop time planning End temperature: when the test is completed, you can choose to return to normal temperature to facilitate the removal of the test object Safety inspection: 15 functions of system detection to ensure the safe operation of the machine, and automatically display the failure time, items and troubleshooting measures Abnormal tracing: it can display the historical data of recorded faults, such as the statistical records of the causes and time of past faults External protection of constant temperature and humidity test box: electronic over temperature protection device independent of the main controller, which can set the upper temperature limit protection of the tested object Communication interface: standard communication interface device, which can be controlled and managed by multi computers on line with personal computer (PC) at the same time Device: the device with super memory capacity can be purchased to replace the traditional expensive paper recorder; with self diagnosis function, the recording interval can be freely selected Constant temperature and humidity box product controller description: imported from Korea, LCD touch panel in Chinese and English, drawing face-to-face input data, temperature and humidity can be programmed at the same time, backlight 17 sections adjustable, curve display, set value / display value curve Various alarms can be displayed separately When the fault occurs, it can be displayed on the screen to eliminate the fault and misoperation Multiple groups of PID control functions, precise monitoring functions, and displayed on the screen in the form of data