Cyan exterior wall latex paint formula

Introduction

• Cyan exterior wall latex paint is a color exterior wall latex paint that can reproduce the national standard color 0565 in a short time, and can also ensure the accuracy of the color to the greatest extent.
  Choose the latex base paint related to the color paste of the required color, and through the color After the machine and the color paint mixer are evenly mixed, the color difference between the prepared color latex paint and the standard color card of architectural coatings is within the allowable range, and the weather resistance of the color shown is also guaranteed to a certain extent.
  .
  

Application field

• Cyan exterior wall latex paint is used for building exterior wall decoration.
  

Recipe details

Production Method

• After the above raw materials are prepared, add cosolvent, dispersant, and defoamer to the water according to the formula (parts by mass) of the latex base paint, stir evenly at low speed and slowly add pigments and fillers, and then disperse the pigments and fillers at high speed, and then sand until The fineness is less than 30μm, filter.
  
• After the filtration is completed, under low-speed stirring, add wetting agent, defoamer, film-forming aid, emulsion to the above-mentioned dispersion slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make the pH Value is 8.
  5~9.
  0, slow defoaming completes the preparation of latex base paint.
  

Precautions

• The range of the mass ratio of each component is: water 8~12, co-solvent 2~4, dispersant 0.
  5~1.
  2, wetting agent 0.
  15~0.
  25, pigment 0~25, filler 0~30, film forming aid 1.
  5~2.
  4, emulsion 35~60, thickener 0.
  20~1.
  0, pH regulator 0.
  1~0.
  2.