Daily maintenance of automatic powder filling machine

Powder filling machine is our company's self-service research and development of specially for the bottle of filling capping integrated machine, the use of disc positioning type filling capping, import splitter control station, touch screen PLC control, high filling accuracy, easy to
adjust.

This machine can be produced stand-alone, and can also be combined with other equipment to form a linkage production line
.

The bottle filling and capping machine is manufactured in full accordance with GMP standards and is widely used in pharmaceutical, food, health care products and chemical industries
.

Powder filling machine has the advantages of high production efficiency, good stainless steel production, convenient cleaning, etc.
, the equipment is suitable for powdery, quantitative packaging of powdery materials, such as: flour, milk powder, pesticides, veterinary drugs, dyes, chemical agents, food, additives, enzyme preparations
.

The daily maintenance of the automatic powder filling machine: 1, before starting the machine, you must first use the rocker handle to rotate the machine, check whether its rotation is abnormal, and indeed determine the normal and then drive
.

2.
Because the filling machine is an automated machine, the size of the bottle, bottle pad and cap are required to be unified
.

3.
When adjusting the machine, the tools should be used appropriately, and it is strictly forbidden to use too large tools or use too much force to disassemble the parts so as not to damage the machine parts or affect the performance of
the machine.

4.
Whenever the machine is adjusted, it is necessary to tighten the loose screws and rotate the machine with the rocker handle to see if its action meets the requirements before you can drive
.

5, the machine must be kept clean, strictly prohibit the machine on the oil, liquid or glass chips, so as not to cause damage to the machine, so it must: (1) the machine in the production process, timely removal of liquid or glass chips
.

(2) Before the shift, each part of the surface of the machine should be cleaned once, and clean oil should be added to each activity department.
(3) It should be scrubbed once a week, especially in the places that are not easy to clean in normal use or blown clean with compressed air
.