-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
High and low temperature industrial chiller boot should see if the steering of the fan is correct, if the forward turn can be turned on to run, inverse means that the power wiring inverse, must be replaced after the phase sequence to start.
high and low temperature industrial chiller units of the protection devices its set value has been set by the factory, users do not change at will.
high and low temperature industrial chiller failure alarm shutdown, first press the unit's stop button (the lamp will go out), and then check the cause of the fault, before the fault has not been corrected must not be forced to start operation.
If not an emergency, the unit must not be shut down by cutting off the main power supply, and if the unit is discontinued for a long time in winter, the high and low temperature industrial chiller unit is shut down, then the main power supply is turned off, and the water in the system is discharged.
to keep the room clean and well ventilated, regularly carry out the cleaning and removal work of the condenser,the normal and stable work of the unit.
high and low temperature industrial chillers should keep the thermal water tower clean, and keep the air flow around the tower, the temperature is low, to avoid debris into the cooling tower to reduce the thermal efficiency.
high and low temperature industrial chillers please keep the surface of the chiller cooling plate clean, ensure the surrounding air circulation, low temperature, regularly clean the scale on the tube to ensure good heat exchange effect.