Daily maintenance of ultra-fine pulverizer

The daily maintenance of ultra-fine pulverizer, ultra-fine pulverizer and air-cooled pulverizer can be better and more efficient to use the ultra-fine pulverizer Add proper amount of lubricating grease to the bearing before starting the ultra-fine crusher, keep the machine lubricated, and check whether the rotary knife is loose, if any, it should be locked or replaced; secondly, tighten the fixed screw of the hopper before each use of the ultra-fine crusher, and regularly check its reliability to prevent personal safety accidents Third, start the motor and check that the rotation direction of the main shaft must be in the direction indicated by the arrow on the protective cover Fourth, the materials must be inspected before crushing, and no scrap iron, nails and other sundries are allowed to mix in, so as to avoid missing the turning knife and crushing chamber, which may cause accidents; if abnormal noise is found during the operation, the machine must be shut down for inspection and then repaired by professional maintenance personnel, and the machine can only be started after troubleshooting In fact, the maintenance of ultrafine crusher in use is almost the same whether it is ultrafine crusher or air-cooled crusher and other micro crushers, traditional Chinese medicine crushers, etc in the daily operation process, pay attention to these points, the service life of the crusher will be greatly extended, I hope friends can use it well.