-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
UV lamp aging test chamber for the test environment is necessary to prescribe, the removal of unfavorable conditions can make the results more refined, but also can reflect the degree
.
Here, Liuqin Technology makes a simple summary of the environmental elements that harm the UV lamp aging test chamber for your reference: the key to the harm of environmental elements is reflected in the following six levels: 1.
The temperature in the box; 2.
Cyclone rate; 3.
Surface environmental pollution; 4.
Ambient humidity; 5.
Reactive oxygen species and other environmentally polluting vapors; 6.
Support frame and installation
.
So what are these six levels? The following is the detailed content: 1, the temperature in the box: in the direct injection link or the stop link, the box temperature should be required by the experimental procedure process to be controlled, and the relevant standards should be based on the main purpose of the machine equipment or components to require the temperature level
to be exceeded in the direct radiation link.
2, cyclone rate: (1) close to the surface of the sample of the cyclone rate size in addition to the hazard of the test product temperature, and even make the monitor radiation intensity of the open temperature difference stack appear obvious deviation
。 (2) In the geographical environment, the probability of a clear amount of solar radiation and a wind force of zero du te standard is very small, so when it is necessary to identify the harm of different winds to specimens such as machinery and equipment or components, it should be required to actually stipulate; 3, surface environmental pollution: dust and other surface air pollutants will seriously change the digestion and absorption characteristics of the surface layer of the illuminated block, and ensure the cleaning of the test product during the experiment; 4, environmental humidity: a variety of raw materials, architectural coatings and other chemical substances in different environmental humidity standards under the photochemical deterioration effect is very large, the provisions of the environmental humidity standards are not the same, the actual environmental humidity standards by the relevant standards clearly stipulated
.
5, reactive oxygen species and other environmental pollution vapors: the shell in the lamp source of short-wave ultraviolet radiation source caused by the reactive oxygen species, because the reactive oxygen species and other environmental pollution vapors will harm the deterioration of some raw materials throughout the process, unless the relevant standards require that this harmful substance be discharged out of the
box.
6, support frame and installation: the thermal characteristics of various support frames and installation methods will be seriously harmful to the temperature of the experimental samples, and it should also be considered that its thermal conduction characteristics can mean typical specific application conditions
.
What environmental hazards will UV lamp aging test chambers be subjected to? Mastering the environmental elements that harm UV aging testing enables people to pay attention to this problem in the application, prevent the detection results from being harmed, and more reasonably exceed the actual effect of
the test.