-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1 Before use, the quality of the die must be checked repeatedly to see if there is any edge missing, crack, deformation, tightness and looseness, and if the device is complete and in good condition 2 Check whether the powder of the particle raw material is dry and whether the powder content Zui in the particle is no more than 10% If unqualified, do not press hard, otherwise it will affect the normal operation of the machine, service life and raw material consumption
3 In the first test run, the pilot pin of pressure regulation control shall be placed on the top, the powder shall be poured into the hopper, the hand wheel of test run shall be turned by hand, the filling and pressure shall be adjusted at the same time, and the weight of the tablet and the software and hardware procedures shall be increased gradually to meet the requirements of the finished product, then the motor shall be turned on first, and the production shall be carried out formally In the production process, the quality of the tablet shall be inspected regularly to see if it meets the requirements Adjust it
4 The choice of speed has a direct impact on the service life of the machine Because the nature, viscosity, sheet diameter and pressure of the raw materials cannot be uniformly specified in use, the structure of the machine has stepless speed change device, which is slowly applicable to pressing minerals, phytochrome, sheet diameter, viscosity difference, and materials that are difficult to form at a fast speed, and is quickly applicable to pressing materials with good adhesion, lubrication and easy to form Material, therefore, the user must depend on the actual situation 5 The management personnel must be familiar with the technical performance, internal structure, operation principle of the control mechanism of the machine and shall not leave the working place during the operation In order to prevent damage to the parts due to failure, the premise is to ensure safe production 6 Pay attention to whether the sound of sub high speed tablet press machine is normal at any time in use In case of scream and strange sound, stop the machine for inspection and elimination, and do not use it reluctantly.