Formula of water-based stain-resistant heat-reflective phase change thermal insulation coating

Introduction

The water-based stain-resistant heat-reflective phase-change heat-insulating coating formula takes measures from three heat-proof and heat-insulation mechanisms of heat reflection, heat emission, and heat conduction block to achieve reliable heat and heat insulation effects.

Application field

The formulation of water-based stain-resistant heat-reflective phase-change thermal insulation coatings is mainly used in the finishing of exterior equipment such as building exterior walls and oil and gas storage tanks.

Recipe details

Production Method

First, the pigments, fillers and dispersants are prepared into a pigment slurry, grind to the specified fineness, add the film-forming emulsion, stir evenly at a medium speed, and then add other additives, stir at a medium speed, and transfer to a low speed, then sieving and packaging.

Precautions

The mass ratio of each component of the water-borne stain-resistant heat-reflective phase-change heat-insulating coating formula is as follows: film-forming emulsion 25-50, heat-reflective pigment 10-25, infrared emission filler 2-15, additive 1-6, and Ionized water 20~30.