Fuchsia exterior wall latex paint formula (2)

Introduction

• Fuchsia exterior wall latex paint can reproduce the color exterior wall latex paint production technology of the national standard color 0491, which can reproduce the national standard color 0491 in a short time, and can ensure the accuracy of the color to the greatest extent.
  Choose the color matching with the required color After the color paste-related latex base paint is evenly mixed by a color mixing machine and a color paint mixer, the color difference between the prepared color latex paint and the standard color card of architectural coatings is within the allowable range, so The weather resistance of the display color is also guaranteed to a certain extent.
  

Application field

• Fuchsia exterior wall latex paint is used for building exterior wall decoration.
  

Recipe details

Production Method

• After preparing the above raw materials, add co-solvent, dispersant, and defoamer to the water according to the formula (parts by mass) of the latex base paint, stir evenly at low speed and slowly add pigments and fillers, then disperse the pigments and fillers at high speed, and then sand until The fineness is less than 30μm, filter.
  
• After the filtration is completed, under low-speed stirring, add wetting agent, defoamer, film-forming aid, emulsion to the above-mentioned dispersion slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make the pH Value is 8.
  5~9.
  0, slow defoaming completes the preparation of latex base paint.
  

Precautions

• The range of the mass ratio of each component is: water 8~12, cosolvent 2~4, dispersant 0.
  5~1.
  2, wetting agent 0.
  15~0.
  25, pigment 0~25, filler 0~30, film forming aid 1.
  5~2.
  4, emulsion 35~60, thickener 0.
  20~1.
  0, pH regulator 0.
  1~0.
  2.