GBT15812.1 Catheter Flow Tester Temperature 8-100 degrees Shanghai Chengwei

GBT15812.
1 Catheter Flow Tester Product introduction: 7-inch touch screen, Chinese and English display
.
AD acquisition speed is 500KHz, internal code 1 million; High-precision clock chip, power-off storage; PLC control; Overload alarm shutdown protection; Nominal specifications, printing, testing, time
.
Control the menu on the LCD screen by the keyboard, real-time display of measured values, average values, automatic judgment of whether qualified or not, automatic output data report, airborne printing test data, can communicate with the upper microcomputer, with 16-bit A/D converter, weighing method to collect and calculate the flow of the catheter, fully in line with GBT 15812.
1-2005 Non-endovascular catheter Part 1 General Performance Test Methods Appendix E YY 1282-2016, YY0285 standard test requirements of the relevant provisions
。 Technical parameters: test range: 1.
00~600.
00g (corresponding changes according to catheter specifications).

Test accuracy: ±0.
01% F.
S (one ten-thousandth of full scale).

Static horizontal plane height: 200 ±5 mm and 1000 ±5 mm; Automatic circulation of the water pump (hydrostatic surface adjustable).

Time controller: 0---60min, error is not more than ±1S; Fixture: adapt to various catheters; Flow calculation: weighing method calculation (optional inlet flow meter calculation).

Flow rate: 525ml/min (optional) ±25 ml/min Net weight: 12.
5kg Dimensions: about 600×400×300 (mm) incubator; Appearance 310*280*180mm, 15 liters, temperature 8-100 degree tray: stainless steel 500ml measuring cup tray with high temperature box: refrigeration constant temperature water tank is widely used for distillation, drying, concentration and temperature staining chemical or biological products
.
The water tank is made of imported stainless steel, the box volume is large, the compartment is made of polyamine foam material, the heat preservation performance is good, the unique air circulation device makes the temperature in the cavity uniform, and the first microcomputer intelligent temperature
control is adopted 。 Power supply: 220v.
50HZ Rated power: 3000W Water temperature fluctuation: ±1°C (microcomputer intelligent temperature control.
High precision) water temperature uniformity: 1 °C temperature control range According to customer requirements Z low temperature installation compressor, both customer requirements Z low temperature 10-100 degrees The product can be equipped with an external circulation device, which can circulate the water in the constant temperature water tank to other devices of the customer, and then circulate to the
water tank.
DIMENSIONS: 460MM*360MM*1400MM