Heat transfer oil heating system selection of air cooling and water cooling difference description

The selection of heat transfer oil heating system needs to be selected according to its own working conditions, and it is also necessary to pay attention to the requirements of air cold water cold explosion protection, so what should be paid attention to in air cooling and water cooling? Common cooling methods are water cooling and air cooling, both of which are selected according to the environment in which the heat transfer oil heating system is located
.

The air-cooled heat transfer oil heating system uses the air flow to generate heat convection, thereby reducing the ambient temperature in the box and achieving the purpose of
cooling.

Water-cooled heat transfer oil heating system uses the flow of water or other coolants and refrigerants for cooling, and its cooling efficiency is generally higher than that of air cooling, and the stability is high
.

The choice of water-cooled or air-cooled is determined by the environment in which the heat transfer oil heating system is often used
.

If the average temperature is the same everywhere, for example, the average temperature in the south is higher, the water cooling effect is better
.

The north is very cold, not suitable for water cooling, and ice, air cooling is a good choice, of course, but also depends on the type of
equipment supporting.

However, due to the high average temperature in the south, the cooling rate is often too low when air cooling is used, and the direct water cooling effect will be better, so the water-cooled type is usually selected; The northern environment temperature is low, the water cooling effect is not good, and it is easy to freeze
.

It will affect the flow of water, so air cooling is appropriate, water cooling and heat dissipation need to have water supply conditions of the site, so there are certain requirements for the site; The air cooling method requires a low site, only need ventilation, the ambient temperature is not high, the cost of decommissioning or an exhaust fan is enough
.

In addition, the model and function of the heat transfer oil heating system vary depending on the manufacturer, so we must first understand it clearly when choosing, and then make a comparative choice
according to our actual working conditions.

To choose the right heat transfer oil heating system we also need to know the operating state of the heat transfer oil heating system and the function and applicability
of the need to control high and low temperatures.

Most of the commonly used temperature media use heat transfer oil, which can achieve accurate temperature control
of -120 °C ~ 250 °C.