echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > High performance UV adhesive resin-FSP8394

    High performance UV adhesive resin-FSP8394

    • Last Update: 2020-11-07
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
     UV glue is widely used in industrial assembly, daily necessities and medical device manufacturing because of its fast curing speed, energy saving and environmental protection. Especially in LCD manufacturing, optical products manufacturing, mobile phone assembly and other high-end technology areas UV adhesives are increasingly favored, market share is also growing steadily. In high-end applications, there are many test items for UV glue, such as high-temperature and high-humidity resistance,

    aging resistance, heat and cold shock resistance, etc. Well-known adhesive manufacturers such as Henco, 3M, Dymax, etc., dominate in some high-end markets, which is not only related to its formulation research and development strength, but also the accumulation of raw materials, a good resin may make the project research and development work more with less effort.
    long-term commitment to all kinds of UV resin research and development and application, in recent years has launched a series of products, and constantly improve the product line. For high-end applications, we have previously introduced the FSP8788, a resin with outstanding high temperature and humidity resistance and strength. Based on the synthesis idea of FSP8788, we have recently developed a
    two-role polyurethane acrylates - FSP8394
    , the main purpose of which is to further enhance interface adhesion, flexibility and low temperature resistance.
    Runo Chemical Technology Center made a series of detailed tests on the resin, the formula uses resin with a small amount of monomer, the appropriate amount of trigger, mainly to investigate the resin curing speed, bonding strength, cohesion, compatible, high temperature and humidity, hot and cold shock and other properties. Through experiments, it can be concluded that FSP8394 has the following characteristics.
    A high bonding strength
    experiment, we tested bonding for different substrates, mainly PC/PC, PC/PVC, PC/glass, glass/glass, glass/aluminum, the test data are shown below. As can be seen from the table, FSP8394 not only has a better bonding strength to the plastic substrate, but also has a better bonding strength to glass and metal. FSP8394 has good adhesion to substrates and wide versatility. In practice, the formulation can be adjusted according to different substrates to further enhance the interface attachment, to obtain excellent bonding strength.
    cohesion isWe will FSP8394 prepared into UV glue and injected into the dumbbell mold, UV curing, the formation of glue strips. A series of test data are obtained by using the puller to carry out the pull test of the glue strip, the results of which are shown in the table below. FSP8394 has a relatively high fracture elongation rate of about 215%, while the cohesion is strong, tensile strength can reach 33MPa, with excellent tenacity. Excellent cohesion forces make the inside of the glue layer less prone to breakage and therefore have excellent bonding fastness.
    high temperature and humidity
    in high-end applications, high temperature and high humidity performance is one of the very important test indicators. The initial bonding strength of many adhesive resins on the market is very high, however, after boiling or high temperature and humidity testing, its bonding strength has dropped significantly, and even the adhesive layer whitening or directly falling off. In the test, FSP8394 has a water absorption rate of about 1.9%, with a relatively high two-bond conversion rate. Testing 1000h at 85C/85% RH showed no change in the glue layer and a slight decrease in bonding strength. In the test of the performance of boiling water resistance, the glue layer will not appear the phenomenon of fog whitening. These tests show that the FSP8394 has excellent high temperature and humidity resistance and can be used in a wide range of high-end applications.
    Cthere resistance
    some UV glue in the winter temperature drop or in the northern low temperature areas, the film will become hard and brittle, resulting in a decrease in strength, for these low temperature environment applications need to screen the main resin or adjust the formulation structure. FSP8394 Tg is not high, low temperature toughness is good, hot and cold impact test bonding strength did not decrease significantly, can adapt to low temperature environment.
    Cure speed
    many good toughness, high elongation rate of adhesive resins on the market have the problem of slow curing speed, low cross-link density, if there is an overflow of glue prone to dry hair sticky problems. FSP8394 curing speed is fast, in 600mJ/cm
    2
    energy can be dried, has a high double-bond conversion rate, can meet the curing requirements of traditional mercury lamps and LED light sources, has a very wide construction window.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Related Articles

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.