How should the small spray desiccant be maintained?

How should the small spray desiccant be maintained? The use of peristaltic pumps is now the development of related industries, which brings more convenience to some fluid work, improves work efficiency, and makes current peristaltic pumps the main equipment used in this period
.

The following editors have sorted out the relevant maintenance methods for you, let's increase knowledge together
.

Common maintenance methods for the peristaltic pump of the small spray dryer: 1.
Check whether the pipelines of the peristaltic pump are smooth, whether the hose joints are loose, and whether the small spray dryer manually rotates the pump head and roller, whether it is flexible
.

2.
Power on the peristaltic pump and check whether the motor is running normally.
After running normally, test whether the peristaltic pump and outlet pressure meet the requirements.
3.
Set the head and flow of the peristaltic pump to ensure that it operates within the optimal range, so as to obtain the best operating status.

.

4.
During the operation of the peristaltic pump, the high temperature of the bearing shall not exceed 80 ℃, and ensure that the temperature of the peristaltic bearing shall not exceed 35 ℃ higher than the ambient temperature
.

 　　5.
During the working process of the peristaltic pump, if abnormal sound is found in the peristaltic pump, the peristaltic pump should be turned off immediately for inspection
.

 　　6.
The daily maintenance should be timely.
After a new pump is used for one month, the lubricating oil should be replaced every 100 hours.
The peristaltic pump should replace the lubricating oil every 100 hours during the working month, and then every 500 hours
.

 　　7.
Regularly check the upper pressure block of the pump head.
If the small spray dryer finds that the upper pressure block is rough and uneven, the upper pressure block of the pump head should be replaced immediately, so as to avoid the hose being subjected to large wear and thus reducing the service life of the hose
.

 　　8.
If the peristaltic pump is not used for a long time, the pump head of the peristaltic pump needs to be disassembled, other liquids in the pump body should be wiped dry, and the lubricating oil of the connection between the pump head and the drive, the motor bearing and other related connection parts should be fully filled, and then placed in the pump.
Safe storage at room temperature
.

 　　The above is the relevant introduction about the maintenance method of the peristaltic pump of the small spray dryer.
I believe that everyone has a corresponding understanding of this after reading it.
You can use it as a reference and hope to help you
.