How to clean the automatic capsule filling machine

The automatic capsule filling machine integrates machine, electricity and gas, adopts microcomputer programmable controller, touch panel operation, frequency conversion and speed regulation, equipped with electronic automatic counting device, the machine is sensitive in action, accurate in filling dose, novel in structure, beautiful in shape and convenient in operation, and can automatically complete the positioning, separation, filling, locking and other actions of capsules, reducing labor intensity, Improve production efficiency and meet the requirements of pharmaceutical hygiene Suitable for filling all kinds of domestic or imported capsules It is an economical and practical equipment for filling capsule drugs in pharmaceutical industry I cleaning frequency: ① after the completion of each batch of production; ② after the completion of each shift of continuous production; ③ before and after production, cleaning and disinfection; ④ when changing varieties, specifications and batch numbers, cleaning must be carried out; ⑤ after equipment maintenance, cleaning and disinfection must be carried out thoroughly II Cleaning tools: clean non silk cloth, vacuum cleaner, brush, cleaning basin, etc 3 Detergent and disinfectant: drinking water, purified water, 75% ethanol IV cleaning method: the cleaning shall be carried out in the order of first dismantling and then washing, first inside and then outside, first zero and then finishing: 1) cleaning steps for production of the same type: first, use a vacuum cleaner and then a soft brush to clean the residual powder in the powder filling device module; second, remove the powder punching rod, measuring plate and powder hopper, take them to the cleaning room, wash them once with drinking water, then rinse them with purified water, and dry them with a dry cloth Wipe and disinfect with a rag dipped in 75% ethanol; ③ wipe the part of the equipment in direct contact with the medicine with purified water, dry it with a dry rag, and then wipe and disinfect with a rag dipped in 75% ethanol; ④ wipe the glass protective cover and the surface of the equipment with purified water; ⑤ clean the site, hang the "cleaned" status mark after passing the inspection; ⑥ fill in the cleaning record   2) cleaning steps for variety change: in addition to the cleaning steps for the same variety of production, the following work shall be done: ① remove the capsule barrel and capsule funnel, take them to the cleaning room, wash them with purified water, dry them with dry rag, and then wipe them with a rag dipped in 75% ethanol for disinfection; ② scrub the movable support of cam disk with rag, and then scrub them with purified water, and then dry rag Wipe dry, then use a cloth dipped in 75% ethanol to wipe and disinfect V cleaning effect evaluation: the whole machine has a bright and clean appearance Wipe all parts of the equipment with a clean white rag There is no stain, stain or residue on the rag.