How to deal with the pressing machine

Tdp-1.5 treatment method after the top car of small-sized tablet pressing: ⑴ in case of the top car situation during the electric tablet pressing, the power should be turned off immediately to avoid burning the motor (2) when the jacking condition is light, turn the hand wheel with the hand wrench to make the upward punch pass the "dead point" (but not reverse, so as to avoid repeated feeding of the feeder, resulting in more serious jacking) (3) in case of serious jacking, loosen the lock nut of the connecting rod, turn the upper core punching rod to make it rise to reduce the pressure, and then turn the hand wheel to eject the tablet Then readjust the tablet hardness 8 In the process of tablet pressing, the quality of tablets (weight, hardness, surface finish, etc.) must be checked frequently 9 The proportioning and pelletizing process before tablet pressing has a great impact on tablet pressing For example, the formulation and granulation of auxiliary materials (such as the condition of powder, particle tightness, proportion of powder particles, water content, etc.) have a direct impact on the tablet quantity And often due to the improper pelletizing of ingredients, it can not be flaked, or even damage the machine Therefore, this machine can not be used for pressing semi-solid or moist or particle free ultra-fine powder In use, if the pressure has been adjusted to a considerable extent, it can not be pressed into pieces or it is pressed into pieces, but it appears too loose, delamination, debris, pockmarks, powder falling and other phenomena We should find out the reasons and solve them from the aspects of ingredients Never adjust and increase the pressure to damage the machine In addition, the hardness of some tablets pressed out by the materials is not big, but it has certain toughness, and its falling and city making property is not bad (usually falling from 1-1.2m height to the ground without breaking) Therefore, it should not only focus on the hardness to meet the requirements of transportation and storage, so as to avoid too much pressure on the tablets and damage to the machine If you want to know more about small tablet press, please log in our company: < or direct Pharmaceutical Technology Department: < for consultation, our factory will provide you with more professional services!