How to look at the angle when the car paint is colored.

Metallic paint is characterized by a different color with angle, that is, with the observation angle of different flashes of light and tone of different colors of an optical effect, by silver powder or pearl and other effect pigments on the incoming light of different scattering and reflection.
metallic paint must take into account the color and effect ratio of multiple angles.
is both the positive side of what we usually tone.
in fact, different master's understanding of the angle is not very uniform, in the end how to understand the angle, here with you to share the definition of the angle.
using the German BYK Micro-Tri colorometer, it supports color analysis at three angles - 15o, 45o and 110o.
let's see how these three angles are defined and how they correspond to the angles we observe during our usual toned process.
Many times we have a misunderstanding of the angle of analysis, most people will be the line of sight and plate angle assessment, and even take the plate and the ground angle to assess, in fact, this ignores a crucial factor - light.
light is the prerequisite for the angle, 15o, 45o, 110o these three angles are the human line of sight and light reflected light on the plate angle, the angle of observation depends on how the light shines on the plate.
three is why we usually look at the position of the color in order to find the right light, 15o head-on (light is strong) 45o front (moderate light) 110o side (low light) 15o We define the face-to-face surface, brightness, strong metallic, is the silver paint or pearl paint flashing the strongest angle, this angle we can see the paint and swatch particle size, flicker degree, but on the observation of the color phase, there is no weak light to see the clear and Intuitive; 45o is the front we define, the light intensity is moderate, very suitable for looking at the hue, clear and intuitive; 110o is the side we define, the light is weak, can reflect the color deviation trend, that is, with the angle of color; 5o, 45o, 110o, is to observe the color in the light from strong to weak constantly changing the process, color and plate to compare, each angle of color difference is controlled at the lowest, in order to ensure that we adjust the color and plate consistent.
.